| From | Message |
TJ
Dodge Dakota
JOIN HERE
1/04/2003
15:06:19
|
 Subject: 408 stroker
IP: Logged
Message:
Does anyone know how much it would probably cost for someone to stroke my 360 to a 408? Parts and labor? I have a 02 cc R/T. What kind of pcm mods would I need? I have a pretty good working knowledge of whats under the hood but not enough to do this. I was thinking KRC since I live in South FL. Any help would be greatly appreciated. thanks guys.
|
Justin Wilson
Dodge Dakota
JOIN HERE
1/04/2003
17:53:36
| RE: 408 stroker
IP: Logged
Message:
You might want to look at www.hughesengines.com for some other stuff. Hughes has built a 360 running off high test making 580hp. You might not want to stroke it but I still am going to do mine. If you can get someone to help you build the motor, you can get alot of Mopar parts from www.mopartsracing.com and they have the stuff to stroke it also. Let me know how it runs if you do it. Bet on around $10,000.00 to complete it and have it running right.
Justin
|
b1llyw
DakotaEnthusiast
1/04/2003
18:33:38
| RE: 408 stroker
IP: Logged
Message:
If you are in South Florida, I'd go talk to Marty at KRC. He does installs as well and is very fair on labor and getting you tuned in.
Bill White
2002 QC 4x4, SLT , 4.7, 5 spd, 3.92 LSD
1995 CC 4x2, SLT, 318, 5 spd, 3.55 LSD
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
