| From | Message |
frog
Dodge Dakota
JOIN HERE
12/29/2002
15:10:57
|
 Subject: Highly Modified Elec. Fan?
IP: Logged
Message:
I have a lot of things done to my truck and wanted to put the electric fan in now.(BLACK AMGIC 150), but here is what I found....
Fan type: Puller
Mounting surface required: 18 in. x 16 in. x 4 1/4 in.
Fan diameter: 15 in.
Airflow cfm at 0 degrees: 2,800 cfm
Amp draw: 13.9
Adjustable thermostat: 180-240 degrees
AC relay: Yes
Typical application: 300 HP; 250 w/AC
I am over 300 HP... I can't do this modor what???
Help modded guys over 300 HP
|
Buzz
Dodge Dakota
JOIN HERE
12/30/2002
11:10:24
| RE: Highly Modified Elec. Fan?
IP: Logged
Message:
I am looking into the same thing but I don't think that the 150 @2800cfm will do the trick... I am trying to find some info on the Viper fan, it is fairly small and pulls 4000cfm... if you find any new info... I was also looking into mounting 2 14" perma-cool universal fans and making my own shroud... I have seen some custom setups without the shroud that work really well.. that would pull 4800cfm... but it would require some work...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
