From | Message |
BH-R/T Dodge Dakota JOIN HERE
1/10/2002 14:43:51
|
Subject: F&B 50mm on ebay IP: Logged
Message: Check it out......
http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=600185893&r=0&t=0
|
bernd *GenIII*
1/13/2002 11:21:46
| RE: F&B 50mm on ebay IP: Logged
Message: They don't flow 804CFM though...only 790. The auction is closed now anyway.
1997 Dodge Dakota SLT - V6 Supercharged/Intercooled @ 10# w/Nitrous 14.55 @ 96.01mph
|
BH-R/T Dodge Dakota JOIN HERE
1/13/2002 12:30:13
| RE: F&B 50mm on ebay IP: Logged
Message: Remember though Bernd that the flow #'s Bruce gave you are not set in stone,that flow # came from another one of Bruces distributors (KRC) and they flow test the t.b.'s themselves,so it might be at 28" instead of 25"?Later....
|
bernd *GenIII*
1/14/2002 00:44:41
| RE: F&B 50mm on ebay IP: Logged
Message: Yup...totally agree. There are also others who flow-test the TB's without the IAC and MAP ports plugged (makes for killer flow numbers but not close to accurate). I trust Marty's testing though...just have to go by Bruce's (Flometrics) numbers as he's the one building them. 25" is where they're tested at.
1997 Dodge Dakota SLT - V6 Supercharged/Intercooled @ 10# w/Nitrous 14.55 @ 96.01mph
|
BH-R/T Dodge Dakota JOIN HERE
1/14/2002 01:05:22
| RE: F&B 50mm on ebay IP: Logged
Message: I totally agree 100% Bernd,I will definetly use Bruce's flow #'s from now on.Thanks
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|