| From | Message |
Mr_bub
Dodge Dakota
JOIN HERE
11/18/2002
01:00:03
|
 Subject: putting a 4.7l or 5.2l in 91 dak
IP: Logged
Message:
i want to make a offroad truck and i think i want to replace the 3.9 with a v8 for more power. anyone know where i can pick up a used 5.2 or 4.7? any help would be appreciated. would it fit in the 91 dak? any sites that sell them or anything? thanx a lot
|
Mr_bub
Dodge Dakota
JOIN HERE
11/18/2002
01:04:41
| RE: putting a 4.7l or 5.2l in 91 dak
IP: Logged
Message:
also... any other dodge motors taht would give considerable HP boost but are easy to find? thanx for the info
|
GSMarquis
Dodge Dakota
JOIN HERE
11/18/2002
18:52:38
| RE: putting a 4.7l or 5.2l in 91 dak
IP: Logged
Message:
Check your local auto-recycler....mine up the street from me always has tons of wrecked rams/durangos/dakotas most from 95-02's that will sell complete engines with computer and wire harnesses dirt cheap. My nextdoor neighbor bought a 98 318 with everything 68k on it for 400.00!
21% OFF ALL GASOLINE @ any station!
www.marquis.gasupusa.com
email: marquisdurango@aol.com
upto 3000.00/day commission
|
POWER HUNGRY
Dodge Dakota
JOIN HERE
11/18/2002
20:30:02
|  RE: putting a 4.7l or 5.2l in 91 dak
IP: Logged
Message:
I know of this site that has rebuilt 318 long blocks," aftermarket & genuine replacement engines that meet or beat Dodge Chrysler specifications for fit and quality."(http://www.dodge-chrysler-auto-truck-engines.com/dodge-chrysler-engines.html). Thier motors come with a 7yr./70,000 mile warranty. You could buy:
91' dakota 318-$1294
92-97' dakota 318-$1585
92' ram 360-$1310 These prices
93-97' ram 360-$1585 are with a
65-71' forged crank 383-$1295 core deposit
73-80' forged crank 400-$1319 subtracted
66-72' forged crank 440-$1363 ($200-$250)
They also say that performance options are available on most engines.
|
POWER HUNGRY
Dodge Dakota
JOIN HERE
11/18/2002
20:54:02
| RE: putting a 4.7l or 5.2l in 91 dak
IP: Logged
Message:
If your looking for a monster motor you might want to check out http://www.crateengine.net/318390.html
With a machined block+ 4" crank+ forged h-beam rods+ custom flat top JE pistons and fully assembled it could be one bad 390!! For only $1800 more in parts you could have a 450ft-lbs torque monster.Choose my way it'll cost $3200 (heads,RR,cam,intake,cpu)you could have yourself a 450 horse killer motor. Wishful thinking!?!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
