| From | Message |
dreammold
Dodge Dakota
JOIN HERE
9/28/2002
01:26:37
|
 Subject: 2.02 Ported Heads
IP: Logged
Message:
Hey I just recently purchised 2.02 Ported R/T Heads and I was wondering how hard are they to install? Also how hard are throttle bodies to install?
|
rtdkota
R/T
9/28/2002
01:45:43
|  RE: 2.02 Ported Heads
IP: Logged
Message:
Get a new timing chain (double roller)-- what other mods????? Do a CAM too-- as the stocker on a 2.02 setup will suck ass....
Expect 2-3 afternoons to do it methodically... and not miss anything. That's what it took here.
Sam
RTDKOTA
|
dreammold
Dodge Dakota
JOIN HERE
9/28/2002
02:13:38
| RE: 2.02 Ported Heads
IP: Logged
Message:
ok as for mods i have:
home brew cai
relocated iat
positive performance headers
custom 3" exhaust w/o cats
krc 220 cam
m1-2bbl mani
ford motorsport 24# injectors
mopar torque converter
180 thermo
i also want to put in a shift kit in the near future, anyone have any experience with the transgo kit or the level 10 kit?
|
kota on 20s
GenIII
9/28/2002
04:20:28
| RE: 2.02 Ported Heads
IP: Logged
Message:
who did your manifold? the TB takes about 15-20 min to install.
-Eric
Injection is nice, but i'd rather be blown.
5.2L, 5speed. Powerdyne SC, 50mm TB, 2bbl M-1, 1.7RR's, MSD 6BTM, ciramic JBA headers, carsound cat, dumped gibson
|
4wDakota
GenIII
9/29/2002
13:34:55
| RE: 2.02 Ported Heads
IP: Logged
Message:
Hey RTDKOTA
Will I loose a lot of torque with the 2.02 heads and stock cam if I go with 1.7 rockers?
This combo with an M1, F&B 50mm, and Flowmaster Catback
98 CC 4x4, 5.2 Auto 3.55LSD
3" Body Lift, 1" Torsion Bar Lift, 33" BFG A/T KO's
|
4wDakota
GenIII
10/01/2002
10:51:31
| RE: 2.02 Ported Heads
IP: Logged
Message:
BTT
98 CC 4x4, 5.2 Auto 3.55LSD
3" Body Lift, 1" Torsion Bar Lift, 33" BFG A/T KO's
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
