From | Message |
Michael DakotaEnthusiast
9/12/2002 01:42:31
|
Subject: Program it yourself ! IP: Logged
Message: Guess what I found !
Power Programmer III
Check it out
www.rpmoutlet.com
Kinda suks for me though, they aren't available for the 4.7 at least not yet. But, I sent an e-mail over to them and will keep everyone posted.
Z-Tube, R/T Rims, SSB Rear Disc Conversion, Alpine Head-Unit, Infinity Kappa Speakers, SilverStar Headlights, HO Cams & Intake installed.
Got H.O. ?
|
Troy Dodge Dakota JOIN HERE
9/12/2002 09:44:03
| RE: Program it yourself ! IP: Logged
Message: Does this work on a 4x4?
2000 Dakota QC 5.9L 4x4
|
Michael DakotaEnthusiast
9/12/2002 10:35:12
| RE: Program it yourself ! IP: Logged
Message: Check out the site for details. I was looking at it for my 4.7 but its not available yet.
Z-Tube, R/T Rims, SSB Rear Disc Conversion, Alpine Head-Unit, Infinity Kappa Speakers, SilverStar Headlights, HO Cams & Intake installed.
Got H.O. ?
|
Nitro Junkie R/T
9/12/2002 11:06:03
| RE: Program it yourself ! IP: Logged
Message: there doesnt seem to be anything on hypertechs site about this !
2000 R/T Belltech 2"-3" Drop w/ Nitro Drop Shocks 40 Series Flowmaster Dumped Exhaust 8mm Taylor Spiro Pro wires w/ Autolite 3923's Mopar Performance Distributor, 180 T-Stat Turbo City Dual Tube Air Intake w/ Twin 5" Round K&N Filters Speed Scene Grill (Upper&Lower)
|
Texas Todd Dodge Dakota JOIN HERE
9/12/2002 11:26:03
| RE: Program it yourself ! IP: Logged
Message: Michael,
Could you nag them for one for a
4.7, 5 SPEED?
Thanks,
Todd
|
ZenDak Dodge Dakota JOIN HERE
9/12/2002 13:05:03
| RE: Program it yourself ! IP: Logged
Message: I've been nagging them for a while!
Just put in another 10+ requests form from their site to have one built for the 4.7L's. I just use my friends' name and emails. heheheheee.
Hopefully they'll be like, "Whoa,,alot people be's wanting one, we better get on the ball and make freak'n make it!". ,,,,ya, that's what I hope.
|
ZenDak Dodge Dakota JOIN HERE
9/12/2002 13:05:39
| RE: Program it yourself ! IP: Logged
Message: I've been nagging them for a while!
Just put in another 10+ requests form from their site to have one built for the 4.7L's. I just use my friends' name and emails. heheheheee.
Hopefully they'll be like, "Whoa,,alot people be's wanting one, we better get on the ball and freak'n make it!". ,,,,ya, that's what I hope.
|
CThomp Dodge Dakota JOIN HERE
9/12/2002 13:20:58
| RE: Program it yourself ! IP: Logged
Message: It doesn't appear that hypertech does near enough maintence or upgrading on their site. Its barely changed since I first looked at it several years ago.
|
xplikt GenIII
9/12/2002 13:23:31
| RE: Program it yourself ! IP: Logged
Message: lol, we need to have weekly email flooding to companies.
2002 2WD RC SLT 4.7L 5spd 3.92 LSD MBRP Single in/out, straight piped 3rd cat, turndown tip Hotchkis swaybars and springs Bilstein custom tuned shocks Roadmaster Active Suspension Shaved emblems and antennae
|
Michael DakotaEnthusiast
9/12/2002 20:02:34
| RE: Program it yourself ! 2 WEEKS!! IP: Logged
Message: i just received an e-mail from them concerning the 4.7 programmer. READY ? They told me two weeks until its release. And I asked for a possible group buy and should here something tomorrow. Hypertech doesn't have it listed on there site, I think it will once it is released. But it is listed at www.rpmoutlet.com, so go over to the group buy section if your interested as I am getting a list together.
Z-Tube, R/T Rims, SSB Rear Disc Conversion, Alpine Head-Unit, Infinity Kappa Speakers, SilverStar Headlights, HO Cams & Intake installed.
Got H.O. ?
|
CThomp Dodge Dakota JOIN HERE
9/12/2002 21:52:34
| RE: Program it yourself ! IP: Logged
Message: Bout damn time. But I think i'll believe it when I see it.
|
stock00R/T Dodge Dakota JOIN HERE
9/13/2002 21:54:18
| RE: Program it yourself ! IP: Logged
Message: November 2002 Sport Truck magazine...they used a Hypertech power programmer on a 2000 5.9. Along with a K&N Gen II and a Gibson Cat-back the truck ended up gaining 16 horsepower and 30 pounds of torque at the rear wheels (226hp@4200 and 316lb/ft@3500). Funny thing is, same issue they install a Vortech (what, $4000?) on a 6 liter Chevy and only ended up with 269hp@5200 and 285lb/ft@4600.
|
foleyr GenIII
9/13/2002 22:27:16
| RE: Program it yourself ! IP: Logged
Message: Dude .. nice .. put me on the list ..
or tell me where to go ..
Thanks
RYan
foleyr .. .......... “Wise men talk because they have something to say, Fools talk because they have to say something”
|
Michael DakotaEnthusiast
9/14/2002 14:04:19
| RE: Program it yourself ! IP: Logged
Message: check the group buy section, I am posting as I gather info.
Z-Tube, R/T Rims, SSB Rear Disc Conversion, Alpine Head-Unit, Infinity Kappa Speakers, SilverStar Headlights, HO Cams & Intake installed.
Got H.O. ?
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|