| From | Message |
Konartis
Dodge Dakota
12/05/2001
12:25:07
|
 Subject: What kind of Exaust to put on a R/T
IP: Logged
Message:
I Have a 2001 R/T RC. What kind of exaust should I put on there? I all i have done to the truck is 1.6 viper rocker arms, Intake, and upgraded chips?
What will sound mean, but not to loud.. I like to race sooo somthing in that feild .
Please help me out.
Thanks
|
Troy
Dodge Dakota
12/05/2001
13:14:20
|  RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
Magnaflow!!
Not too loud: sounds really good. Loud enough to hear from a distance, but not obtrusive. No interior resonance like the Flowmasters, either. I have one on a 5.9 with equal-length headers and larger y-pipe, and it sounds great.
|
Konartis
Dodge Dakota
12/05/2001
13:17:23
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
where did you get the Y- pipe from? do you have flowmaster on? and what kind of headers
|
MikeD
Dodge Dakota
12/05/2001
13:22:38
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
Hey Konartis I got a 2001 RC R/T also and I got the Flowmaster 40 series but it may be loud for you cuz you can hear it in the cab, so you might go w/ what that one guy said. Oh and if you get tips don't get chrome cuz I got 3-1/2" chrome tips and they are rusting on the inside, plus another guy from this site his have already started rusting on the outside...so try to find stainless steel tips.
~Mike~
|
konartis
Dodge Dakota
12/05/2001
13:30:16
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
I prob will put dumps.. i don't like tips on a truck to redneck for me.. =) What do you think about stock cat- with 3" piping with Borla Muffler and a dump?
Or 3" piping with a Flomater 2 chamber and a Dump
|
R/Truck
Dodge Dakota
12/05/2001
16:33:25
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
What is a "dump"? I have some rusty chrome tailpipes and would rather have the exhaust hidden.
Please no smart remarks about "dump".
|
HSKR
Dodge Dakota
12/05/2001
16:49:13
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
A dumped exhaust is pretty much like you describe. It is hidden. No tips stick out from under the truck. A ot of people just put turn downs on the muffler exit for dumps. Mine is dumped after the axle. For mufflers, go Spintech. Spintech now offers cat back systems, but they all come with tips. One kit has a exit in front of passenger side tire if you ant that look. To hear diferent exhausts and to try and find what you might like, go to www.blackdakrt.com/mpegs.html he has at least 10 different exhaust mpegs in there. Mine is there as Brian Cropp's dumped Spintech. Mine is the 5441 model though, not 3441.
|
Josh Lee
Dodge Dakota
12/06/2001
07:32:13
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
Hey Konartis, what did the 1.6 viper rockers do for you performance-wise? I am curious...
Joshman
|
konartis
Dodge Dakota
12/06/2001
12:19:38
|  RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
I bought it with the truck... It does some means of power.. when the truck it at idle you can her it.. But i have no idea.. I think about 10 horse power .. Not really sure.. sounds bad ass.. Bout to get 3" piping with i think flows and a dump
|
AndyL
Dodge Dakota
12/06/2001
15:57:15
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
I have a 99 cc 5.2 3.92 auto and I put gibson stainless split rear system w/borla square tips and it sounds mean it kinda sounds like it has headers when at idle but it's not overly loud or sound trashy like W.T. chevys. The reason I went with stainless is I live in Mn say no more snow salt ice!
|
Soundless 360
Dodge Dakota
JOIN HERE
11/05/2002
00:21:52
| Dak Fumes
IP: Logged
Message:
hey, i just bought a 2000 R/T RC and i want to get one of the spintech exaust systems but i cannot find anything anywhere on the net or in stores about where i can get it. any help would be greatly appreciated
|
Hersbird
Dodge Dakota
JOIN HERE
11/05/2002
01:52:08
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
The viper should use the same rockers as the stock 5.2 and 5.9 just more of them. Maybe sombody put 1.6 mopar performance roller rockers in there but while these may be a common upgrade for the viper, the viper does not come from the factory with anything different then the stock 1.6 non-roller rockers.
I think the MBRP is the best exhaust with the Positive performance headers (AKA Mopar performance headers). These are not smog legal on the 2001 but can be made to work just fine try www.krcperfromance.com for the headers with 02 fittings added, and www.premier-automotive.net for MBRP systems.
|
Lew360
Dodge Dakota
JOIN HERE
11/05/2002
01:52:11
|  RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
www.spintechmufflers.com
'99 RC DA R/T, Gibson Headers and Cat-back, MSD 6a, BTM, Powerdyne Supercharger, M-1 4/2, Mopar PCM
|
Matt
Dodge Dakota
JOIN HERE
11/09/2002
20:38:32
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
In opinions of exhaust, I have an 02 RC R/T and i removed my third cat and put a 3 inch pipe into a series 40 flowmaster dumped, i love it but then again i like it as loud as legal soooo it depends. It really has loud interior noise but like i said, i like that. For roller rockers, i put 1.7 Comp Cams Roller Rockers on mine and noticed an immediate difference. The torque was really noticeable and the new vavle covers look better anyway. Just my opinions!
|
EyeTrip
R/T
11/11/2002
00:18:18
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
I have the 40 flowmaster and 3" "Y" into a 3.5" single pipe. I love the rumble! And it's fun in the parking garages too. hehehe
I'm A Cow
|
AlmightyDart
Dodge Dakota
JOIN HERE
11/11/2002
00:28:22
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
Ok well heres an idea why not buy something that eveyrone wants. A MBRP cat back exhaust, sounds killer and adds more perforance than a flowmaster. I'm thinking of true dual or this muffler.
|
Lew360
Dodge Dakota
JOIN HERE
11/11/2002
02:36:21
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
Eyetrip did you have the y-pipe custom built? Can you email me the info. ,on the shop that did it, so I can have one built? Thanks in advance.
'99 RC DA R/T, Gibson Headers and Cat-back, MSD 6a, BTM, Powerdyne Supercharger, M-1 4/2, Mopar PCM
|
Slammed00R/T
Dodge Dakota
JOIN HERE
11/11/2002
10:06:41
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
Go with a 3in cutout. Itis loud and cost is only about 70$ installed.
2000 ext. cab R/t
Mopar heads, cam, Headers
Magna Charger 12 psi
75 shot (TNT wet kit)
MSD, boost retard
3in cutout/ Weld drag lites and much more.
SUB 7 in the 1/8 mile on street tires
|
Tinyracerr1
Dodge Dakota
JOIN HERE
9/18/2003
23:08:00
|  RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
Who makes true dual and how much does it normaly run? I have a 99 ext cab R/T and I am inquaring bout upgrades that I can do to my truck with engine wise and interier. Please email me back anyone and let me know what is a good true dual exhaust system that will fit on my R/T.
Tinyracerr1
|
Lando
Dodge Dakota
JOIN HERE
9/19/2003
02:22:51
| RE: What kind of Exaust to put on a R/T
IP: Logged
Message:
Spintech makes a true dual system for the R/T's with a side exit setup. really bada$$. talk to scott at www.gsmotorsports.com he'll give you a good deal on one.
Lando
|
Tinyracerr1
Dodge Dakota
JOIN HERE
9/20/2003
11:22:01
| RE: What kind of low profile tonnaue cover is good
IP: Logged
Message:
I have a 99 dakota R/T and was wondering what is a good brand for a tonnaue cover low profile if anyone could let me know I am looking for one that is fiberglass.
|
| | P 1 Next Page>> |
