Forums
Forum Tools
|
 |
01:25:39 - 12/20/2024
V8 Dakotas
| From | Message |
titus Quad
Dodge Dakota
JOIN HERE
8/26/2002
22:09:11
|
 Subject: HORSE POWER 4.7
IP: Logged
Message:
What mods,chips,intake can I do for
more horse power for my 2001 4.7
QC? Without spending more than a grand
|
POWER HUNGRY
Dodge Dakota
JOIN HERE
8/26/2002
23:27:41
|  RE: HORSE POWER 4.7
IP: Logged
Message:
A post I saw when do a search said:
Matt Barret
7/08/2002
08:21:17
Subject: 4.7L HO cams/intake Dyno results +30hp
IP: Logged
Message:
"I finally made it back to the Dyno after installing the HO cams and HO Intake.
My baseline numbers, prior to the HO install were 214 hp @ 4600rpm and 290 tq @ 3300 rpm.
The results, in my opinion were very impressive. While only making +15 peak HP, the increase from 4800 rpm to 5300 rpm ranged from +10 hp up to +31 hp !! I let out of the gas at 5300 rpm, mainly because prior dyno runs had shown I was making less power above 5000. The intersting thing about the HO cams and intake was that it was still pulling hard at 5300 rpm's, 220 hp !! with no signs of falling off. Had I pulled up to 5400 rpm, the hp increase would be in the range of +45 hp !!!!
In other words, this engine is now pulling well above 5000 rpm. Here are the peak numbers for the HO cam/Ho intake:
230 hp @ 4400 rpm / 290 tq @ 3650 rpm
I'm estimating the crankshaft HP @ 270 HP
270hp x .85= 229.5 hp
$250 WELL spent, in my opinion!"
What I have read this is the best mods.
|
conig
Dodge Dakota
JOIN HERE
8/27/2002
00:27:42
| RE: HORSE POWER 4.7
IP: Logged
Message:
go to moparchat.com and do a search on are there mods that work on the 4.7l prove it. duner has a nice breakdown of some good mods.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
