From | Message |
99greendak Dodge Dakota JOIN HERE
3/29/2004 18:21:42
|
Subject: RE: Electric Fans For 5.2 IP: Logged
Message: I have a SPAL dual 11 inch electric fan. The instructions say that the heat sensor thermostat goes into the cylinder head. Well there is hole in the head for this. Does anyone know of any other options I might have.
|
Dakota52318 Dodge Dakota JOIN HERE
3/30/2004 20:18:37
| RE: Electric Fans For 5.2 IP: Logged
Message: Im running the same fan thats in the Viper. Works great, 2 speeds... the way I have it wired I can sellect high/low/off with one switch, manual on with another, and AC disconnect (does not come on with compressor) with the third. Held up to 100+ weather on LOW. No shizzle.
TJ
dakota52318@toad.net
1992 Dodge Dakota 4X4
3.90 Gears, Long Bed
318, 46RH Auto
DT Headers, Functional RamAir Hood
K&N FIPK, Flowmaster Muffler
Custom Throttle Body
MP Computer
Viper Electric Fan
15.74@87.59 b4 fan.
4350lbs
|
dakfan Dodge Dakota JOIN HERE
4/22/2004 17:31:27
| RE: Electric Fans For 5.2 IP: Logged
Message: help me, please reply, i was driving, tried to pass a truck, bad fan clutch kicked the fan off and it went straight through the raidiator, i replaced everything, including the fan with 2 14 inch eletric fans, how do i wire them with out having to switch them on and off every time i start the truck
97 dak cc
5.2 nv 3500 5spd
|
dakfan Dodge Dakota JOIN HERE
4/27/2004 10:12:42
| RE: Electric Fans For 5.2 IP: Logged
Message: never mind, i bought a thermostat for it and also wired in a bypass switch for towing and when the ac is on
|
dale88 Dodge Dakota JOIN HERE
8/29/2005 13:50:33
| RE: Electric Fans For 5.2 IP: Logged
Message: Has anyone used the flex-a-lite 180 on 1993 with 5.2 and have you had any install problems?
|
pitadak Dodge Dakota JOIN HERE
8/29/2005 21:58:14
| RE: Electric Fans For 5.2 IP: Logged
Message: Tried one on my 98 5.2. I live in AZ and it was not even close to being adequate in this heat. Put the stocker back on. And yes, it was a pain in the a$$ to mount it correctly. The wiring is easy.
|
| <<Oringinal Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|