| From | Message |
Justin
Dodge Dakota
JOIN HERE
7/27/2002
12:49:13
|
 Subject: Home made intake..
IP: Logged
Message:
I want to make a home made intake for my 2001 R/T. What parts do i need and where i can buy them. I went to home depot and did not find anything that i can use... Any pics or point my in the right direction.. Thanks
J
|
kotadude21
Dodge Dakota
JOIN HERE
7/27/2002
13:37:38
|  RE: Home made intake..
IP: Logged
Message:
www.geocities.com/kotadude21/intake.html
that should shed some light
brent
|
Turboguy
Dodge Dakota
JOIN HERE
7/27/2002
14:54:03
| RE: Home made intake..
IP: Logged
Message:
You can get some 3" to 3" "fernco" couplings. They are used in plumbing often. Use the thinner grade PVC (not sch 40 or DWV). Typically the thinner stuff is used for vents or irrigation.
All in all, it should set you back more than $60 (and thats paying $50 for the cone filter)
|
Justin
Dodge Dakota
JOIN HERE
7/28/2002
11:58:12
|  RE: Home made intake..
IP: Logged
Message:
ya i looked at home depot.. can not find anything like that.. i going to try lowes... thanx guys
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
