| From | Message |
CrzyBri82
GenIII
 
7/23/2002
17:25:52
|
 Subject: Flowmaster
IP: Logged
Message:
Ok, i dont have much time to search around in here and try to find what im looking for. But i was jsut wondering if anyone has the a dual out flowmaster exhaust on their dak? if so let me know how u like it. im thinkin bout gettin it put on my 2000 4.7 dak.
|
R/Truck
Dodge Dakota
JOIN HERE
7/23/2002
18:18:26
|  RE: Flowmaster
IP: Logged
Message:
I had one and didn't like it, switched over to a magnaflow. Performance and sound both improved.
|
Rob
GenIII
7/23/2002
18:50:04
| RE: Flowmaster
IP: Logged
Message:
I also had it on my truck but took it off for a singlein single out magnaflow muffler.Magnaflow has a much better sound and there is more low end with the single outlet.
robertshaw 180 thermostat,Z-Tube,Magnaflow stainless exhaust,jet stage 2,throttle body spacer,,Street scene bumper cover,Stull full billet grill and shell,street scene gen 2 rollpan,Apc clear corners,Apc euro tails,DJM 2inch control arms and 3 inch block,power slot brake rotors 18x8 boyd atlas rims
|
dano 360
Dodge Dakota
JOIN HERE
7/23/2002
20:24:09
| RE: Flowmaster
IP: Logged
Message:
hey guys,what type and size magnaflows are you runnung?
danny
|
kennungesser
Gen III
7/23/2002
20:27:38
| RE: Flowmaster
IP: Logged
Message:
I could use those numbers myself.
Kenneth l Nungesser
|
johnny
Dodge Dakota
JOIN HERE
7/24/2002
09:53:19
| RE: Flowmaster
IP: Logged
Message:
just installed a 40ser,delta flow singlein doul out all 2.5, in a 4.7 and its alot louder than i thought it would be.. im happy with the sound outside but inside its real drony. also ive noticed when you rev it and then relese it has a sharp regurgatating sound that i dont like, any one know how to get rid of this eritating sound??
|
4wDakota
GenIII
7/24/2002
11:03:05
| RE: Flowmaster
IP: Logged
Message:
I've always loved the sound of 2-chamber flowmaster on a mustang 5.0. I had a 2 chamber on my old 351 F-150 and it was sweet. I know the mustangs have dual exhaust and all but I was wondering if the flowmaster or magnaflow sounded like that on a dodge. Any thoughts?
Corey
98 CC 4x4, 5.2 Auto 3.55LSD
|
Canucker
Dodge Dakota
JOIN HERE
7/24/2002
11:11:11
| RE: Flowmaster
IP: Logged
Message:
I'll let you all know this afternoon .. my 4.7L is in the shop getting the muffler on and dual tailpipes out the back :)
One thing to note, you're not going to gain much, if any HP with that damned 2 1/4" Y-Pipe in front of the cat. What I wanted the muffler shop to do was replace the 2 1/4" pipe with 3" (still retaining the initial part of the 'Y') but I can't afford it right now cause apparently it's a lot of custom work and that costs $.
I plan on replacing that after getting a high flow cat. Until then, the only thing I'm expecting from the cat back is sound.
Johnny,
I had that sound when I had a 5.0L Mustang and eliminated it by plugging up and removing the air pump ... I'm pretty sure the Daks don't have air pumps though I could be wrong. I've also noticed that sound (very faint and muffled) just from the stock exhaust. I'm not sure if its something we have to live with or not ... Anyone else?
|
Todd W
GenIII
7/24/2002
11:47:54
|  RE: Flowmaster
IP: Logged
Message:
I have a dual out Flowmaster 40 on my Dak. Sounds -great- outside, and not bad inside, but under power beween 1500 and 2500 RPMs it's pretty drony. I'll probally stick a Magnaflow on it someday.
'00 RC Sport Forest Green, 3.9L, 5-speed 3.55, Hurst Comp-Plus Shifter, Clear-Corners, Speed-Glo gauges, Airaid Intake with relocated IAT, Autolite 3923s, Ported Throttle Body, Borg & Warner Cap/Rotor, Accel Coil, JBA 9mm Wires, JET Stage II, 185 T-stat, Flowmaster 40 w/dual out
|
MikeD
*R/T*
7/24/2002
12:28:21
| RE: Flowmaster
IP: Logged
Message:
Hey Canucker when you get your 3" you'll definately love it...I have true duals w/ 3" from the headers all the way back, no cats & 2 Flowmaster 40 series. It turns heads & scares children! :)
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
R/Truck
Dodge Dakota
JOIN HERE
7/24/2002
12:49:26
| RE: Flowmaster
IP: Logged
Message:
I'm running the 5x11 oval body (aluminum) 3" center in / offset out (model #12589).
They have several models available, check them out at www.magnaflow.com
The 5"x11" oval body MagnaFlow was designed for Trucks, SUV's and RV's with larger engine displacements. You can get a smaller one that will be louder but will not sacrifice flow.
|
Rob
GenIII
7/24/2002
13:09:39
| RE: Flowmaster
IP: Logged
Message:
I have the stainles steel round body 2.5/2.5 in/out
robertshaw 180 thermostat,Z-Tube,Magnaflow stainless exhaust,jet stage 2,throttle body spacer,,Street scene bumper cover,Stull full billet grill and shell,street scene gen 2 rollpan,Apc clear corners,Apc euro tails,DJM 2inch control arms and 3 inch block,power slot brake rotors 18x8 boyd atlas rims
|
Canucker
Dodge Dakota
JOIN HERE
7/24/2002
13:18:23
| RE: Flowmaster
IP: Logged
Message:
LOL Mike D ... I had that on my old stang .. 3" duals all the way! and it scared children and little girls too ... as well as Camaros, Corvettes, and Firebirds!
3" duals is a little big for the 4.7 though ... it was a little big for the Stang even.
|
Canucker
Dodge Dakota
JOIN HERE
7/24/2002
17:10:07
| RE: Flowmaster
IP: Logged
Message:
Well I just got my flowmaster 40 series on there ... after much humming and hawwing with the muffler shop (they didn't do a very good job the first time around) ... the results:
Sounds awesome!
Whoever said the flowmaster 40 series is too loud is too old!
Its nothing compared to some of the Mustangs and Chevy pick-ups running around here. I can barely hear it at idle.
There's that annoying gurgling sound that johnny was mentioning, but I think that can't be helped with the 4.7 (like I said, I heard it with the stock exhaust).
No noticable power difference, as I expected, but like I said earlier, the stock y-pipe is still in front of the cat choking the flow.
|
4wDakota
GenIII
7/24/2002
17:50:08
|  RE: Flowmaster
IP: Logged
Message:
Anybody have the plain Force II cat-back exhaust. I think its 3" single out with a 50 series (3 chamber). I'd like to hear what you think and any sound clips.
98 CC 4x4, 5.2 Auto 3.55LSD
|
Torque
Dodge Dakota
JOIN HERE
7/24/2002
19:34:02
| RE: Flowmaster
IP: Logged
Message:
I have a 50 series w/ delta flow, 2.5 single both in and out. I love the sound. Sounds like a race car when I want it to, quiet when I don't. Turns heads because it's different... unlike those dual exhaust trucks that have that deep booming sound.
--
http://www.coloradodesigns.com/truck
|
MikeD
*R/T*
7/24/2002
22:08:10
| RE: Flowmaster
IP: Logged
Message:
When my exhaust shop first did my dual exhaust I had the 40 series single in dual out taken off and they said they made a 40 series dual in dual out for true duals and I got it on there (which turned out to be a 50 series) I could barely hear the truck at all. I took it back when they realized they accidentally put on a 50 series. So they took it off and put 2 40 series on and there was a big difference.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
DMSDAK
Dodge Dakota
JOIN HERE
7/25/2002
02:29:18
| RE: Flowmaster
IP: Logged
Message:
I have the Flowmaster 50 Series Delta Flow Force II System and its not 2.5 in and out its 3'' all the way from the back of the muffler to the single rear exit and maybe infront somewhat to?? Cant remember right off? I know for a fact its 3 from the back of the muffler to the rear single exit cause I had to order a special 3'' tip and have it spread out to even go over the exit. It sounds really good!!! I get compliments everywhere I go. Its very different sounding and no droning what so ever from the Delta Flow 50 Series. Its hardly noticable at Idel ,(or in the ab anytime), but can be moderatly loud at WOT outside. Sounds good with the addition of my Airaid intake.
|
ZenDak
Dodge Dakota
JOIN HERE
7/25/2002
12:28:35
| RE: Flowmaster
IP: Logged
Message:
I've had a 2chamber (40 series?) Flow on for about a yr. now,,,and abesolutely love it! The sound is awesome out of my 4.7, and I have had nothing but compliments.
Excellent rumble, and you now I'm there when I floor it. No droning, that I've noticed,,,to the point of irratating resonance in the cab. Has a great 'pop' to it when you get off the gas too.
Have the single in/ dual out,,going out duals in the rear.
Love it!
|
Dak318
Dodge Dakota
JOIN HERE
7/26/2002
15:26:23
| RE: Flowmaster
IP: Logged
Message:
I went one better than just 3 inch pipe, I got 5 inch run from the manifolds to the cat and the glasspack, with 2.5" duals running out the back.
|
chris
Dodge Dakota
JOIN HERE
7/26/2002
23:36:45
| RE: Flowmaster
IP: Logged
Message:
I went with the dual 3 1/2 dual set-up. The truck sounds amazing. No low end loss at all. I have had many complaints. Truck is loud from start to finish. Very throaty, and gurgly. Amazing, simply.
--
Chris
|
Muzzy
GenIII
7/27/2002
00:57:49
|  RE: Flowmaster
IP: Logged
Message:
4wDakota-
I have the Force II 3" cat back system. I love the way it sounds. You can barely hear it going down the highway, but when you give it some throttle, it sounds really good. The system came with a 2.5" inlet and 3" outlet 50 series. Sorry I don't have any sound clips.
-Muzzy
2001 EC Dakota 4x4 - 287ci V8 - 5 Speed - 3.92 gears/w Sure Grip
Borla Stainless Steel Headers - IAT Adjuster
Flowmaster Force II Cat Back - Ported TB/Custom Cold Air intake
H&K USC Security System
Coming Soon - head porting/ install HO cams & valve springs
|
mopar2ya
Dodge Dakota
JOIN HERE
7/29/2002
02:34:42
|  RE: Flowmaster
IP: Logged
Message:
I lost low end torque also when I got my flowmaster installed. What modifications can I make to try and get the torque back?
mopar2ya
|
Lee
Dodge Dakota
JOIN HERE
7/29/2002
07:44:21
| RE: Flowmaster
IP: Logged
Message:
I've got a 2 chamber flowmaster on my 318-5 spd. and i love it! just cut my cat out last weekend and it got even better.. happy hunting
|
4wDakota
GenIII
7/29/2002
11:06:40
| RE: Flowmaster
IP: Logged
Message:
Thanks Muzzy, I'll probably get the Force II.
Corey
98 CC 4x4, 5.2 Auto 3.55LSD
|
Toadmobile
Dodge Dakota
JOIN HERE
7/30/2002
23:45:19
| RE: Flowmaster
IP: Logged
Message:
Hi ive got a 94 standard cab 5spd dakota with a 318 and i was just wandering if anyone has one with a cat back system by flowmaster with dual pipes and there is an american thunder option when you orderand and i was wandering what the difrence is also i dont want it to backfire either so any advice would be great Thanx
|
JameyZ
Dodge Dakota
JOIN HERE
7/31/2002
10:11:56
| RE: Flowmaster
IP: Logged
Message:
Who is running 5 inch from the manifolds back? I think even 3 inch is overkill on a small 318, unless high rpm is what the engine is used for. 5 inch is a stove pipe. Pretty stupid.
|
chris
Dodge Dakota
JOIN HERE
6/18/2003
18:24:25
| RE: Flowmaster
IP: Logged
Message:
i've got 2000 r/t 360 w/lighting killer package.i just got delta force 40 series race muffler. will let you know results.
|
| | P 1 Next Page>> |
