Forums
Forum Tools
|
 |
00:37:10 - 12/20/2024
V8 Dakotas
| From | Message |
dakotartracer
Dodge Dakota
JOIN HERE
7/12/2002
15:45:45
|
 Subject: supercharger
IP: Logged
Message:
hello,
I own a dodge dakota r/t cc and i would like to get more power out of it. what do you think I should do? I want to put on a supercharger but I would like to know what some other people are using.
|
5pnt9ltrluv
R/T
7/12/2002
15:58:21
|  RE: supercharger
IP: Logged
Message:
Look at my mods...if any of it helps ya.
Kris
Powerdyne w/ 9#, True dual Flowmaster 40's, MSD 6A w/ Blaster SS coil, Taylor Spirocore 8mm, Flowmetrics 50mm throttle body, JBA headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v, Ported 1.92 R/T heads, 4bbl M1, 24# injectors, Crower 1.7 Roller Rockers, Hotchkis 2/3 w/ Nitro shocks
|
j
Dodge Dakota
JOIN HERE
7/12/2002
16:57:04
| RE: supercharger
IP: Logged
Message:
Hey 5pnt9ltrluv, 9lbs of boost sounds like a lot to me. You are not having any detonation problems? Did you make any mods to prepare for the high boost? Thank you.
|
5pnt9ltrluv
R/T
7/12/2002
17:01:27
| RE: supercharger
IP: Logged
Message:
umm...nope no detonation problems. I had the whole top end of the motor rebuilt specifically for boost. I have a 6BTM going in on monday. I have nitrous grade Head gaskets installed, ARP studs for the heads as well...
Kris
Powerdyne w/ 9#, True dual Flowmaster 40's, MSD 6A w/ Blaster SS coil, Taylor Spirocore 8mm, Flowmetrics 50mm throttle body, JBA headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v, Ported 1.92 R/T heads, 4bbl M1, 24# injectors, Crower 1.7 Roller Rockers, Hotchkis 2/3 w/ Nitro shocks
|
j
Dodge Dakota
JOIN HERE
7/12/2002
17:17:21
| RE: supercharger
IP: Logged
Message:
Awesome truck.
|
kota on 20s
GenIII
7/13/2002
20:42:25
| RE: supercharger
IP: Logged
Message:
what gaskets? felpro?
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
5pnt9ltrluv
R/T
7/13/2002
21:09:15
| RE: supercharger
IP: Logged
Message:
No, i think it was something like Scitech....or something like that...I do not remember exactly.
Kris
Powerdyne w/ 9#, True dual Flowmaster 40's, MSD 6A w/ Blaster SS coil, Taylor Spirocore 8mm, Flowmetrics 50mm throttle body, JBA headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v, Ported 1.92 R/T heads, 4bbl M1, 24# injectors, Crower 1.7 Roller Rockers, Hotchkis 2/3 w/ Nitro shocks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
