| From | Message |
Mopar4life
Dodge Dakota
JOIN HERE
5/23/2023
19:10:36
|
 Subject: 2006 dakota 4.7 won't go o er 2500 rpm
IP: Logged
Message:
I have a 2006 dakota with a 4.7l v8. When it
getts to 2500 rpms it cuts out until the rpms
are below 2500 rpms again. I am getting a cam
sensor code. I replaced both the cam and crank
sensors, and visually inspected the plugs and
wiring harness. It still cuts out at 2500 rpms.
Any advice would be greatly appreciated
|
Monsters
Dodge Dakota
JOIN HERE
6/10/2023
18:25:52
| RE: 2006 dakota 4.7 won't go o er 2500 rpm
IP: Logged
Message:
Look at the timing chain. Mine did this and I was
able to drive it but it would not rev over 2500. My
chain on the driver's side actually broke so I was
only running on one side. My mechanic and a lot of
others were shocked it would still run. I was getting
the sensor code also but nothing other than that.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
