Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:22:00 - 12/20/2024

V8 Dakotas
FromMessage
96dak3185spd
Dodge Dakota
JOIN HERE
 Email

3/27/2014
22:22:53

Subject: v8 engine swap
IP: Logged

Message:
hey there i have a 96 dakota 2wd 5spd and i just
recently put a 5.2 in it out of a 94 ive bought the
96 v8 comp from junkyard and wired a harness .. now
i have it running but no vacum lines on it and i
think the obd1 vacum lines are diffrent ? can
anyone one help ? also what else on motor will need
to be changed
thanks ricky



daddio
Dodge Dakota
JOIN HERE
 Email

3/28/2014
06:57:05

RE: v8 engine swap
IP: Logged

Message:
The '94 motor is OBDI and the '96 is ODBII so the wiring and
vacuum lines would be different. Also, the 94 has an EGR and
the 96 does not. I'm pretty sure you should be able to use all
of the sensors from the 96 on the 94. I'm sure there is
something else I'm missing.



ricky
Dodge Dakota
JOIN HERE
 Email

3/28/2014
11:09:25

RE: v8 engine swap
IP: Logged

Message:
so can i just block the line on the egr . or do i
have to remove it ? also if i can get vacum lines
off a 98 dodge ram same magnum which is obd2 will
the vacum lines and sensors off it work



ricky
Dodge Dakota
JOIN HERE
 Email

3/30/2014
08:44:51

RE: v8 engine swap
IP: Logged

Message:
can anyone tell me what i need to do ?



daddio
Dodge Dakota
JOIN HERE
 Email

3/31/2014
13:27:24

RE: v8 engine swap
IP: Logged

Message:
If it were me, iw ould pull the intake manifold, all the sensors and vacuum line off of the 96 motor and put them on the 94.



ricky
Dodge Dakota
JOIN HERE
 Email

4/03/2014
23:40:52

RE: v8 engine swap
IP: Logged

Message:
i changed all the stuff over it runs alot better
when it gets running , but its having trouble
starting now it seems its flooding out .. im gonna
try the idle air conrtol or whatever its called

any other ideas what i could be




Jim Kuhn
Dodge Dakota
JOIN HERE
 Email

6/05/2014
21:40:06

RE: v8 engine swap
IP: Logged

Message:
I will begin Monday morning I will be putting a 318 small block in my now V6 Dakota. I would like to know if I'm going to run into any problems pulling out the V6 and putting in a 318?



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.