| From | Message |
Dak318
Dodge Dakota
JOIN HERE
6/12/2002
14:45:49
|
 Subject: Holley Throttle Body
IP: Logged
Message:
Why doesn't anybody use the holley? I have a 2x52mm holley, I'm more than happy with it.
91 318 sport, engine is a 94 magnum.
|
Dakaty
GenIII
6/12/2002
17:25:43
| RE: Holley Throttle Body
IP: Logged
Message:
I have a 52 Holley and I am pleased with it.
I would like to find someone in my area (Houston)with a different brand performance TB and swap for a "comparison".
|
Jeff
Dodge Dakota
JOIN HERE
6/12/2002
18:42:53
|  RE: Holley Throttle Body
IP: Logged
Message:
I have been using 52mm Holley for almost 2 years now. The only problem I encountered was the throttle cable connection was different. After a phone call to Holley they sent me a new throttle shaft to correct the problem.
|
dak318
Dodge Dakota
JOIN HERE
6/12/2002
18:47:12
| RE: Holley Throttle Body
IP: Logged
Message:
I didn't even have that problem, but I didn't put my throttle body on. They guy that put my motor in ordered and installed it.
|
DaveR
Dodge Dakota
JOIN HERE
6/12/2002
19:38:34
| RE: Holley Throttle Body
IP: Logged
Message:
I am personally not to impressed by the Holly I have on mine. It is a stock TB bored to 50mm. When I started cutting into it I started noticing some pourocity which means air pockets in the casting. Of course I could have gotten the one bad one out of the batch, but who wants to try their luck?
|
slowturbo
Dodge Dakota
JOIN HERE
6/16/2002
17:07:32
| RE: Holley Throttle Body
IP: Logged
Message:
how much does a Holley 52mm cost by chance?
|
Dak318
Dodge Dakota
JOIN HERE
6/16/2002
23:51:18
| RE: Holley Throttle Body
IP: Logged
Message:
I don't rememeber what I paid for it.
|
slowturbo
Dodge Dakota
JOIN HERE
6/17/2002
00:00:07
| RE: Holley Throttle Body
IP: Logged
Message:
Ballpark range?
|
Boomer
Dodge Dakota
JOIN HERE
6/17/2002
07:12:13
| RE: Holley Throttle Body
IP: Logged
Message:
www.jegs.com
www.summitracing.com
|
rtdkota
Dodge Dakota
JOIN HERE
6/17/2002
10:42:24
| RE: Holley Throttle Body
IP: Logged
Message:
Holleys are a nice piece, but more expensive than the F&B.. PLUS, with an F&B if you have any problems or questions, you can speak with the person who designed it, or the one that put your TB together. Comes with a 30 day return policy-- try that with Holley! F&B TBs-- designed by a Dodge (Dakota owner)...
I've got 50mms ready to ship!
Sam
www.socaldakota.com
619-448-5016
|
slowturbo
Dodge Dakota
JOIN HERE
6/17/2002
20:40:12
| RE: Holley Throttle Body
IP: Logged
Message:
rtdkota - how much would one cost for a 91 5.2? i am looking to purchase one ASAP!!
|
Dak318
Dodge Dakota
JOIN HERE
6/18/2002
01:02:22
| RE: Holley Throttle Body
IP: Logged
Message:
In order to get one for the 91 you have to have atleast a 94 model engine, or seriously modified 91 model. My engine came from a 96 Ram 1500
Holley doesn't make the 52mm for a pre-magnum engine.
|
Halvor
Dodge Dakota
JOIN HERE
6/18/2002
09:57:02
| RE: Holley Throttle Body
IP: Logged
Message:
There is a Holley 52mm throttle body on ebay right now if anyone is interested.
|
orangehat
GenIII
5/17/2006
21:44:18
| RE: Holley Throttle Body
IP: Logged
Message:
i have a 01 qc 4.7, what would i gain from a holley 52 or similar from another maker?
|
GraphiteDak
GenIII
5/17/2006
22:58:40
| RE: Holley Throttle Body
IP: Logged
Message:
It would not fit the 4.7 unless you machined an adapter. By then you should probably get a 72mm 4.7 one, but those are intended for modded engines.
They make a ported 68mm, 70mm, and a 72mm for the 4.7
The 4.7 is a large single barrel TB. The 5.2's use a two barrel TB.
|
orangehat
GenIII
5/18/2006
00:37:46
|  RE: Holley Throttle Body
IP: Logged
Message:
well i guess i made it pretty obvious i'm just learning. so what differnace woulda 72mm make?
|
GraphiteDak
GenIII
5/18/2006
23:56:02
| RE: Holley Throttle Body
IP: Logged
Message:
I hear the 72mm would not do a lot for a stock engine. And a few reported a rough idle and some other stumbling problems. But I'd almost think something like the TPS, IAT, etc got out of wack.
I'd only think the large TB would just effect some grunt if anything and still help up top.
Some day I'll get brave and build me a dual runner intake manifold :)
|
Ryan
Dodge Dakota
JOIN HERE
5/19/2006
02:40:23
| RE: Holley Throttle Body
IP: Logged
Message:
would i be wasting my money by getting a 50mm tb for my truck seeing that it has a stock 50mm in it. By the way it is a 99 cc r/t.
|
N56629
Dodge Dakota
JOIN HERE
5/19/2006
06:30:46
| RE: Holley Throttle Body
IP: Logged
Message:
Not all so-called 50mm's flow the same but for the most part you would be wasting your money for very little, if any, improvement.
|
PB
Dodge Dakota
JOIN HERE
5/19/2006
17:05:32
| RE: Holley Throttle Body
IP: Logged
Message:
stock 50mm tb flow rate is 635cfm @ 25", F&B 50mm is 760cfm @ 25" of murcury
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
