| From | Message |
lil joe
Dodge Dakota
JOIN HERE
4/29/2013
22:28:37
|
 Subject: stalling
IP: Logged
Message:
I have also tried having it plugged up to get the codes off of it but everybody i have had plug up to it there readers wont read it so i havnt been able to even get a starting point any ideas on either ?
|
Don
Dodge Dakota
JOIN HERE
4/30/2013
12:09:23
| RE: stalling
IP: Logged
Message:
you need to wait for the check engine light to come on b4 you can get a code out. mine keeps coming back cam crank sensor. this is a false reading!! bought a new sensor($600)no help,installed my new sensor in another dakota and it ran fine 4 a week so sensor was not bad
|
daddio
Dodge Dakota
JOIN HERE
4/30/2013
13:16:20
| RE: stalling
IP: Logged
Message:
You can read a code if there is one stored without the CEL being on. I think it takes the PCM seeing the same code 3 times within a certain timeframe to trip the CEL. So if it's only tripped the code once or twice the light won't be on but the code will be there. I've done it before myself. If you've tried several different code readers and cannot get a code, try the key trick. Turn the key on/off/on/off/on and the codes will display on the odometer depending on the year of your truck.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
