From | Message |
dan hicks Dodge Dakota JOIN HERE
2/07/2011 16:22:56
|
Subject: re: 97 dakota 5.2 headlight and tail IP: Logged
Message: I have a 97 dakota 5.2, i had a problem with the headlights. i changed the multi switch and the headlights worked for 3 months. i have replaced the switch again and the headlights worked for annother month or so, i now have no low beams and no tail lights. i dont want to keep replacing the switch, any ideas why this keeps happing would be greatly appreciated. thanks in advance, dan hicks
|
motospike925 Dodge Dakota JOIN HERE
2/15/2011 14:11:47
| RE: re: 97 dakota 5.2 headlight and tail IP: Logged
Message: check the connector to the head light switch its more than likly melted if it is relace the connector and switch and get a new switch assembly for in the steering column
|
motospike925 Dodge Dakota JOIN HERE
2/15/2011 14:13:08
| RE: re: 97 dakota 5.2 headlight and tail IP: Logged
Message: oh yea check all grounds umder the hood for the lighting harness and check under the dash behind the kick panels
|
dan hicks Dodge Dakota JOIN HERE
2/16/2011 10:55:54
| RE: re: 97 dakota 5.2 headlight and tail IP: Logged
Message: thanks for your response, fixed a ground prob with the headlights. they are now functioning properly, i still have tail light issues. i checked the connection between harnesses under the brake booster i have power there but not at the third connection at the bumper. I now believe it has to do with the trailer light connection.
|
motospike925 Dodge Dakota JOIN HERE
2/18/2011 08:20:14
| RE: re: 97 dakota 5.2 headlight and tail IP: Logged
Message: whatdoes your truck have that split harness for the trailer ? just replace it
|
Mudslinger896 Dodge Dakota JOIN HERE
3/11/2011 09:55:35
| RE: re: 97 dakota 5.2 headlight and tail IP: Logged
Message: Those trailer wiring "T"s are annoying. If you have any
double wires into one side of a connection start there first,
that's where I found my problem. Tho my truck is missing
the driver side connector and the wires are just splices nd
connected together (thanks to whoever had it b4 me) so I
had to cut one plug off the harness to splice it in... also
check the grounds for the tail lights. Inside the area u pull
them out of
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|