| From | Message |
motospike925
Dodge Dakota
JOIN HERE
1/31/2011
21:03:04
|
 Subject: cyl1 and cyl 2 missfire
IP: Logged
Message:
i did a 5.2 to a 5.9 swap in my 97 dodge dakota and ocassionally i get a cyl 1 and 2 missfire code any 1 have any ideas
|
poorboy
Dodge Dakota
JOIN HERE
2/07/2011
16:22:07
| RE: cyl1 and cyl 2 missfire
IP: Logged
Message:
pull plugs on 1-2 see what they look like if they look good check for bad wires(loose,cracked,touching or rubbing anything metel) if thats fine check for cracked or carboned up cap/rotor good luck
|
motospike925
Dodge Dakota
JOIN HERE
2/11/2011
09:56:17
| RE: cyl1 and cyl 2 missfire
IP: Logged
Message:
ay poorboy, yea thats been done already the plugs look good im thinking about sending all the injectors out th have them cleaned the weird part is i dont hear or feel any misfires or skips i did a balance check the cylinders are with in 15 psi of each other, it could be either crap in the fuel rail getting to those injectors or the ecm needs to be flashed for the 360 and its not the plenum gasket i did a test to varify that ,
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
