| From | Message |
Larry404
Dodge Dakota
JOIN HERE
9/08/2010
10:39:05
|
 Subject: 1992 Dakota rear end
IP: Logged
Message:
I have a 1992 Dodge Dakota with a 318 engine. I need to replace the rear end and found one that is a very good buy. Only problem is it's out of a 1989 and I don't know if it will work in mine. The 92 Dakota universal bearing caps come in 2 Diff. sizes, mine is the larger size. If I buy the rear end, and it has the smaller size, is it a hard job to swap yokes? Also, will I run into other problems?
Thanks
|
larry404
Dodge Dakota
JOIN HERE
9/08/2010
10:53:43
| RE: 1992 Dakota rear end
IP: Logged
Message:
How do I find out what the gear ratio is?
Thanks
|
yea
Dodge Dakota
JOIN HERE
9/09/2010
00:31:09
| RE: 1992 Dakota rear end
IP: Logged
Message:
Sticker some locations to check,
Inside glove box, under hood, Door
Tag on the rear itself.
If all else fails good old chalk method.
|
larry404
Dodge Dakota
JOIN HERE
9/09/2010
11:32:08
| RE: 1992 Dakota rear end
IP: Logged
Message:
I found out that "Crossover" universal joints are available. These cups are two sizes in one.
I didn't know such a thing was available
|
aDakotaGuy
Dodge Dakota
JOIN HERE
9/12/2010
18:45:48
| RE: 1992 Dakota rear end
IP: Logged
Message:
Count the teeth on ur ring and then the pinion, and do some
division, thats ur ratio. Yokes can be swapped.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
