| From | Message |
MOPARornoCAR
Dodge Dakota
JOIN HERE
6/03/2010
12:37:17
|
 Subject: cleaning throttle body
IP: Logged
Message:
hello,
whats he best way to clean the intake/throttle body on a 5.9 2001....without paying 150$ for a professional service.
Bryan
|
???
Dodge Dakota
JOIN HERE
6/04/2010
14:53:10
| RE: cleaning throttle body
IP: Logged
Message:
Cleaning the intake?
Are you talking porting?
|
MOPARornoCAR
Dodge Dakota
JOIN HERE
6/05/2010
08:01:30
| RE: cleaning throttle body
IP: Logged
Message:
i was just wondering how to clean that big steel thing with two barrels that look like a carb....i think its called a throttle body...it hold the iac motor and tps and the map sensor ....
|
fotodak
Dodge Dakota
JOIN HERE
6/05/2010
09:50:20
| RE: cleaning throttle body
IP: Logged
Message:
If you do it in situ, do it as you would a carb!
Or remove the TB then all sensors and the IAC and then clean with spray carb cleaner. Do not move the plunger on the IAC.
|
Easy
Dodge Dakota
JOIN HERE
6/08/2010
21:07:43
| RE: cleaning throttle body
IP: Logged
Message:
Or just drop it in a bucket of WD-40 for an hour or so then blow it dry with compressed air.
|
Jim Mann
Dodge Dakota
JOIN HERE
8/07/2010
16:38:46
|  RE: cleaning throttle body
IP: Logged
Message:
Maybe a little late but.....
I use spray seafoam and a brush. Spray it in with the engine running. Load it up.
Shut it off and take a brush and clean the butterflies. and the throat. Spray it down. Let it set for 20 minutes. The seafoam that gets in to the cylinders will act to decarbon the cylnders. Take it out and run it to clean it out.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
