| From | Message |
alex
Dodge Dakota
JOIN HERE
6/20/2002
18:36:33
|
 Subject: RE: KRC 4.7L cams....
IP: Logged
Message:
Hmmmmm........ they must be getting popular. What did the dealer near your house tell you?
|
Gabriel
Dodge Dakota
JOIN HERE
6/20/2002
20:08:09
| RE: KRC 4.7L cams....
IP: Logged
Message:
$95 is the quote I was getting hear in Phoenix for the cams
|
crm
Dodge Dakota
JOIN HERE
6/21/2002
00:34:52
| RE: KRC 4.7L cams....
IP: Logged
Message:
thx alex, i'll look forward to his post...wont be getting mine done till sometime later next month, but figured i should get some more results or feedback prior to having them order the parts...
|
alex
Dodge Dakota
JOIN HERE
6/21/2002
08:08:19
|  RE: KRC 4.7L cams....
IP: Logged
Message:
I paid $70/cam that included shipping. It sounds like you guys are going to be paying a hair bit more, but if you wait much longer, it may be even more expensive. It's only an extra $50 overall......
Guess what I'm saying is, if you were to be buying a cam and intake manifold combo for something like a 5.0 or a Camaro, then you would be paying a LOT more than $180. I'm talkin' like $500 or worse.......
I guess just be grateful and hurry up & order!!
|
Dr0p0ff
GenIII
6/21/2002
08:37:44
| RE: KRC 4.7L cams....
IP: Logged
Message:
yes but the cams you're buying for the 'stang or the 'maro aren't stock cams from another vehicle. they're custom grinds.. not really any more money goes into production, but u do have to pay for performance
Keep On Truckin!
Sgt G
|
alex
Dodge Dakota
JOIN HERE
6/21/2002
09:01:20
| RE: KRC 4.7L cams....
IP: Logged
Message:
That's my point. Paying $180 for 10-15 more hp and a 20ft/lbs* of torque is damn cheap!!
*Approx KRC dyno numbers....
|
alex
Dodge Dakota
JOIN HERE
6/21/2002
09:03:11
| RE: KRC 4.7L cams....
IP: Logged
Message:
Let me explain this further.....
Ask your dealer for a price on the STOCK cam for YOUR 4.7 motor. Not the Jeep part number, YOUR motor part number.
My dealer told me that those are about $230 PER CAM!!!!!
Holy Schnikeys!!
|
Fred
Dodge Dakota
JOIN HERE
12/24/2002
13:32:03
| RE: KRC 4.7L cams....
IP: Logged
Message:
why is Koons Ford selling parts for Dakotas???
|
.alex.
Dodge Dakota
JOIN HERE
12/24/2002
13:56:07
| RE: KRC 4.7L cams....
IP: Logged
Message:
Koons Ford/Dodge/Jeep in falls Church, Virginia. Ask for Eric Slaton.
1-800-665-5870
|
Rob C
Dodge Dakota
JOIN HERE
12/27/2002
18:58:42
|  RE: KRC 4.7L cams....
IP: Logged
Message:
Who's got the best price on the Mopar H.O. cams for the 4.7 engine. I was going to buy from this site as soon as my warranty expired but, they just jacked the price per cam up from $55 to $81.
http://www.buymopar.com/store/jeep.html
Does anyone know of a site that's still selling the cams for about $55 per cam? Thanks for your help.
|
Hoss318
Dodge Dakota
JOIN HERE
1/03/2003
23:38:47
| RE: KRC 4.7L cams....
IP: Logged
Message:
Anyone know the best price on the HO cams... I'm ready to buy, but jacking the price makes me a maaad customer. Thanks!
R/Trottmann
|
gps_jetskier
Dodge Dakota
JOIN HERE
1/06/2003
13:34:52
| RE: KRC 4.7L cams....
IP: Logged
Message:
http://www.buymopar.com/store/jeep.html states $100.88
http://www.buymopar.com/store/magnum.html states
$106.88
????Who runs this site anyway???? Ford guys?
|
Board Kong
Dodge Dakota
JOIN HERE
1/06/2003
15:01:56
|  RE: KRC 4.7L cams....
IP: Logged
Message:
Does getting aftermarket cams void warranty?
I will hopefully have a 4.7 5-speed in a month and I plan on giving it a bit of aftermarket performance.
|
gps_jetskier
Dodge Dakota
JOIN HERE
1/07/2003
07:59:32
| RE: KRC 4.7L cams....
IP: Logged
Message:
So is the lowest price now the 100.88 (previously $88)I posted above? I see KRC sells thier version for $199 a pair. Guess I'll go that route if so. I can't find any $55 that's for sure....
|
Texas Todd
Dodge Dakota
JOIN HERE
1/07/2003
09:03:33
| RE: KRC 4.7L cams....
IP: Logged
Message:
gps, whats your coordinates?- J/K, you know gps?
Have you tried where i got mine, from the Dodge dealer in Wakefield Rhode Island? Since I have them installed, I guess you'll have to check them yourself, but it could be worth it. Mine were $120 shipped.-for the pair, not each.
If I've posted and/or you've tried this already-my bad, sorry, just rying to help a fellow dak owner.
|
gps_jetskier
Dodge Dakota
JOIN HERE
1/07/2003
10:14:56
|  RE: KRC 4.7L cams....
IP: Logged
Message:
You've got it right....but I'm not giving my cooridinates! Hmmm... I didn't find your post. Where is the name/number? I'll call.
|
Rob C
Dodge Dakota
JOIN HERE
1/07/2003
23:59:11
| RE: KRC 4.7L cams....
IP: Logged
Message:
I recently got a quote from McKinney Dodge for $87.20 each plus $14.95 for shipping. Their website is at
http://www.mydodgeparts.com
However, I didn't see a way to order them onsite but, there's a way to contact them on the webpage. Here's their telephone number and hours:
Call 1-800-272-7050 x 1123,M-F, 7am to 5pm CST
|
Northern Gary
Dodge Dakota
JOIN HERE
2/04/2003
23:28:15
| RE: KRC 4.7L cams....
IP: Logged
Message:
I have a 2001 durango, 4.7l, thinking about installing the ho cams, anyone know the added torque after installation? Im currently running a K&N air intake, gibson cat back exhaust, and a phase 2 power chip with a performance thermostat, and Im looking for some extra torque for pulling a trailer... any insight?
|
D
GenIII
2/05/2003
01:31:02
| RE: KRC 4.7L cams....
IP: Logged
Message:
20ft/lbs of torque...check out the dyno#'s at
www.krcperformance.com
2001 4.7 CC
shaved
dropped
FOR SALE $17,900
pointurd@hotmail.com
|
Norhtern Gary
Dodge Dakota
JOIN HERE
2/05/2003
08:17:01
| RE: KRC 4.7L cams....
IP: Logged
Message:
Anyone hear anything about edlebrock cams coming out, apparently by fall 2003, and mopar is to have one before that??
|
Texas Todd
Dodge Dakota
JOIN HERE
2/05/2003
08:54:44
| RE: KRC 4.7L cams....
IP: Logged
Message:
Yankee Gary,
I have an 01, QC, Dak, 4.7, 5spd manual.
I pull my 20ft. catamaram sailboat, trailer and boat weigh about 1,000 lbs. And after I installed the HO cams, with a few minor mods, it pulls in 5th at 2,ooorpms, at 65MPH (3.55 LSD rear end). The torque at those low r's is soo much better now, whereas I used to have to put it back down to 4th on hills at those low r's.
|
Northern Gary
Dodge Dakota
JOIN HERE
2/05/2003
22:37:06
| RE: KRC 4.7L cams....
IP: Logged
Message:
Thanx Todd, kinda the info Im lookin for, although Im pullin a 24ft westwind holiday trailer, wheighs about 5500lbs loaded, and pulls good, even through the mountains, but ya can never have to much torque.... Im sure it could pull better and easier, Im workin pretty hard with it, infact I have to take out my chip because the shift points are to agressive with the trailer on, which is why i whant the extra muscle
|
Rob C
Dodge Dakota
JOIN HERE
2/06/2003
02:10:01
| RE: KRC 4.7L cams....
IP: Logged
Message:
Here's a good place to buy the Mopar H.O. cams from:
http://www.buymopar.com/store/jeep.html
|
gps_jetskier
Dodge Dakota
JOIN HERE
2/06/2003
07:47:40
|  RE: KRC 4.7L cams....
IP: Logged
Message:
That's why I wanted it too. I'm pulling a 30 foot Trail Lite travel trailer. It's 4800 dry. I try to pull it with nothing in it, but...you can't go with nothing either. I'm suprised how well the quad pulls it really.
|
| | <<Previous Page P 4 Next Page>> |
