| From | Message |
Lease
Dodge Dakota
JOIN HERE
5/30/2009
16:05:26
|
 Subject: ECM
IP: Logged
Message:
does my 95 modle Dakota have an ECM?
If so then would it have to be reprogramed when replaced?
|
mac
Dodge Dakota
JOIN HERE
6/04/2009
23:45:28
|  RE: ECM
IP: Logged
Message:
I don't know about the "does it have" question. A look in a service manual would tell you...local library should have the Chilton.
As for reprogramming...likely not since these things don;t usually use eproms that can be reprogrammed. Yours dead? Got another one from a same spec vehicle? Plug it in and should work right from the start. Unless it, too, is faulty..
|
Kowalski
GenIII
6/05/2009
13:50:05
| RE: ECM
IP: Logged
Message:
Also called the PCM; yes, it does. Don't expect a replacement to work right from the start for a '95 unless you have the correct vin programmed into it.
Lead, follow, or get out of the way
|
stacey
Dodge Dakota
JOIN HERE
7/06/2009
23:59:14
| RE: ECM
IP: Logged
Message:
PCM and yes will need to be programed. they call it flashing. you will need vin # and millage. i had to replace mine. i bought a refurbished on 300.00. plus flashing charge and i put in in myself, very easy to do, i'm a girl!
|
92dakotabasta
Dodge Dakota
JOIN HERE
7/08/2009
03:57:02
| RE: ECM
IP: Logged
Message:
A used ECM will run you about a 100 bucks.....92-95 obd1
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
