| From | Message |
pauljhudson
Dodge Dakota
JOIN HERE
4/09/2009
12:53:47
|
 Subject: poor mans exhaust
IP: Logged
Message:
a sawsall does wonders for a broke ass like me i was saving up for a borla kit but i recently got laid off so i just cut that stocker off behind the cat and ran a 3 1/2 inch pipe strait out the back. yes this is illegal but it is mostly for hunting, only thing im worried about is scaring every animal when i drive it into the woods
|
pauljhudson
Dodge Dakota
JOIN HERE
4/09/2009
12:55:45
|  RE: poor mans exhaust
IP: Logged
Message:
i should also add the 318 i have with no muffler is very loud and if your truck is for the street i dont know if i would recomend this mod unless u like equipment violations from the law
take ur chances if u must!!!
|
ow yeah
Dodge Dakota
JOIN HERE
4/10/2009
17:00:42
| RE: poor mans exhaust
IP: Logged
Message:
Hill Billy Headers!!!
Vroooom Vroooom Vroommmmm
NOT!
|
pauljhudson
Dodge Dakota
JOIN HERE
4/17/2009
21:31:36
|  RE: poor mans exhaust
IP: Logged
Message:
well you know how we do it down here in alabama.
its just a mud race truck in the works. got plans for a 440 swap. it should be in by the end of the summer allready welded the 12 bolt diff in the rear that i just swaped in. not sure about the front axle yet it will definatly be a solid axle. i really want to go with umimog portals but im not sure if i could get it geared high enough any input is welcomed
|
no
Dodge Dakota
JOIN HERE
4/17/2009
22:51:52
| RE: poor mans exhaust
IP: Logged
Message:
"not sure if i could get it geared high enough"
You mean Geared LOW enough
& you should use tire height to determine your gear ratio
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
