| From | Message |
bayden
Dodge Dakota
JOIN HERE
6/16/2008
19:21:17
|
 Subject: R to D stall
IP: Logged
Message:
hey, im haveing a problom, when i come out of reverse and go to drive the engine wants to stall, there is no engine lights or anything on what could the problom be?
|
justin
Dodge Dakota
JOIN HERE
6/18/2008
08:20:33
| RE: R to D stall
IP: Logged
Message:
yea this wont help but i have kind of the same prob with my 97 4x4 V8 and it will do it in reverse as well, especially in 4wd. i have been told it is time for a new torque converter.
anybody know more?
|
Joey
Dodge Dakota
JOIN HERE
7/10/2008
13:11:21
| RE: R to D stall
IP: Logged
Message:
it is probably your torque converter clutch solenoid (TCC). It is probably stuck on and the converter wants to automatically lock whenever in drive. For about 100-150 bucks you can get a new solenoid and install it yourself, ive done it and it takes a few hours or you can take it to the dealer. Mine got stuck in the off position so i had no lockup and my gas mileage got really bad.
|
jayb
Dodge Dakota
JOIN HERE
7/11/2008
16:23:11
| RE: R to D stall
IP: Logged
Message:
that would be the case if it stalled. if it sounds like it wants to stall, it could be the IAC clogged.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
