From | Message |
XSEAB Dodge Dakota JOIN HERE
5/26/2008 10:44:04
|
Subject: Code P 0463 IP: Logged
Message: I got this code yesterday while driving. Fuel Gauge went to E (when the tank was half full) and the check engine light as well as low fuel light came on. After I stopped and restarted the engine the fuel gauge worked fine for 5 minutes then went back to E. How can I fix this?
|
Todd Dodge Dakota JOIN HERE
5/26/2008 16:42:13
| RE: Code P 0463 IP: Logged
Message: P0463-FUEL LEVEL SENSOR NO.1 HIGH
When Monitored: Ignition on and battery voltage above 10.4 volts.
Set Condition: The fuel level sensor signal voltage at the PCM goes above 4.9 volts for more than 90 seconds.
"How can I fix this?"
By $upporting your local Dodge $ervice Department.
|
XSEAB Dodge Dakota JOIN HERE
5/26/2008 21:07:06
| RE: Code P 0463 IP: Logged
Message: thanks for the help.
|
XSEAB Dodge Dakota JOIN HERE
5/29/2008 09:38:33
| RE: Code P 0463 IP: Logged
Message: anyone have any experience with this code? I disconnected the battery for an hour or so this weekend, filled up the gas tank and the check engine light went off. I'm not sure why I got the code in the first place.
|
XSEAB Dodge Dakota JOIN HERE
6/05/2008 11:39:48
| RE: Code P 0463 - HELP IP: Logged
Message: Can anyone help me with this issue? After a week hiatus with no problems my check engine light came back on yesterday with the same code.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|