From | Message |
brad Dodge Dakota JOIN HERE
1/31/2008 10:08:21
|
Subject: tranny hitting the floor in 4X4 IP: Logged
Message: hey i have a 97 4x4 5.2L and when i put it in 4x4 it makes this nasty sound like the tranny is either falling out or hitting the floor of the truck ( it actually moves the center console when it does this. Do you guys think it might be the tranny mounts? I havent looked under it yet, its at the shop right now. thanks
|
daddio Dodge Dakota JOIN HERE
1/31/2008 15:42:48
| RE: tranny hitting the floor in 4X4 IP: Logged
Message: tranny or motor mount.
|
Splitter Dodge Dakota JOIN HERE
1/31/2008 19:28:26
| RE: tranny hitting the floor in 4X4 IP: Logged
Message: Well Geez, guy. While it's at the shop, have it looked at.
|
Lane Dodge Dakota JOIN HERE
1/31/2008 22:39:55
| RE: tranny hitting the floor in 4X4 IP: Logged
Message: sometimes when a u-joint is bad it can make that sound, but if its movin' stuff as bad as you say it may be the tranny or motor mount
|
brad Dodge Dakota JOIN HERE
2/01/2008 10:23:59
| RE: tranny hitting the floor in 4X4 IP: Logged
Message: after a new tranny mount and a wheel bearing and both upper and lower ball joints on both sides, i should have her back on the road. I took a look under it lastnight and found the tranny mount was broke right along a weld. Is this a comon thing ?
|
rnaz GenIII
2/03/2008 11:45:54
| RE: tranny hitting the floor in 4X4 IP: Logged
Message: A broken trans mount is not a common problem. Usually the rubber wears out in the mount instead.
M1, CAI, Flowmaster 40 true duals, no cats KRC 210x cam, headers, Mopar PCM, R/T heads, MSaine 2800 stall converter 1.6 Harland Sharp roller rockers MSD, 55mm Hughes TB N2O & 4.56 gears coming soon!!!
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|