From | Message |
99R/T Dodge Dakota JOIN HERE
10/24/2007 21:09:01
|
Subject: 5.9 rebuild IP: Logged
Message: i need to rebuild my motor, its a 99 r/t, i plan on getting a supercharger down the line any advice on what to put in and how much
|
Mullets RT Dodge Dakota JOIN HERE
10/25/2007 15:24:41
| RE: 5.9 rebuild IP: Logged
Message: Forged internals is good if you are gonna throw a supercharger on and run more than 10#'s of boost. And other than that, the usual bolt ons with some good flowing heads.
|
.boB Dodge Dakota JOIN HERE
10/25/2007 20:29:52
| RE: 5.9 rebuild IP: Logged
Message: Beste performance with a blower is accomplished with low static compression - like 8:1 - and the right cam. Unfortunatly, those items would make a NA engine run like a dog.
If you have the funds, build a blower motor and add the blower at the same time.
Otherwise, you'll need to comprimise a bit and accept some low performance until you get the blower added.
Blowers and NA alike make power by moving air. Use the best heads you can afford. I would recommend the Edelbrock heads. Be sure to port match the manifold. Not so important with NA, but more important with a blower.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|