Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
07:29:25 - 11/17/2024

V8 Dakotas
FromMessage
Captain Chaos
Dodge Dakota
JOIN HERE
 Email

9/05/2007
22:28:22

Subject: 4.7 exh manifold replacement
IP: Logged

Message:
I'm going to be replacing the right (passenger side) exhaust manifold. Any one have any idea what book and/or real time is for this? Any tips, hints or suggestions are also greatly appreciated...



wilky
Dodge Dakota
JOIN HERE
 Email

9/06/2007
02:01:51

RE: 4.7 exh manifold replacement
IP: Logged

Message:
captain chaos. Last month I had to replace two broken bolts and gasket on the left manifold of my 00 dakota 4.7 its reletivly easy. First disconnect the battery and remove the air filter box, then raise the truck and support with jackstands,next raise the transmission from the tail end with a hydralic jack,loosen or remove the trans crossmember in order to move the exhaust pipe as needed disconnect the exhaust pipe from both manifolds and move out of the way,I recommend a good quality socket as to not strip bolts.Then remove the 8 bolts size 10mm and remove manifold.You might have to drop out the bottem. I hope that helps,p.s. it will take 2-3 hours



1hotkadota
Dodge Dakota
JOIN HERE
 Email

9/06/2007
13:13:02

RE: 4.7 exh manifold replacement
IP: Logged

Message:
Dude, you don't need to do all that. Just jack up the truck and remove that one wheel. There are two bolts that attach the manifold to the exhaust pip, remove those, then remove your heat shield, remove bolts from exhaust manifold, attach new manifold and repeat in reverse the previous instructions.

I did this recently to both manifolds and I was done in about an hour.

Sorry Wilky, but your method seems very complicated.





Captain Chaos
Dodge Dakota
JOIN HERE
 Email

9/06/2007
21:06:53

RE: 4.7 exh manifold replacement
IP: Logged

Message:
Thanks to both of you! With both of your ideas, this should be pretty straightforward.



modain
GenIII
 Email User Profile


9/07/2007
02:30:13

RE: 4.7 exh manifold replacement
IP: Logged

Message:
Simple recommendation: use all new bolts and nuts. It's worth the extra cost to avoid having a reused bolt bust sometime in the (possibly near) future, necessitating a repeat performance.

What's your left foot doing?
==============
2002 Graphite QC SLT Plus, 4.7L, NV3500, Superchips 3715, 3.92 LSD, R/T rear swaybar, no chrome, loads o'fun...
2001 Patriot Blue Durango SLT, 4.7L, 45RFE, Superchips 3715, 3.55 Open (for now)
1999 Forest Green Dakota RC Sport, 2.5L, NV1500, 3.55 Open



1hotkadota
Dodge Dakota
JOIN HERE
 Email

9/07/2007
13:04:32

RE: 4.7 exh manifold replacement
IP: Logged

Message:
Yeah dude, listen to Modain.

I had two bolts on the passenger side manifold break and I replaced them with stock bolts from the stealership. Now I'm waiting for them to break again so I can replace them with stronger ones.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.