| From | Message |
Brad
Dodge Dakota
JOIN HERE
8/06/2007
16:31:11
|
 Subject: 1993 5.2 Driver's side motor mount
IP: Logged
Message:
Anyone changed this mount before? Can it be done at home with basic tools?
Thanks, Brad
|
Brad
Dodge Dakota
JOIN HERE
8/14/2007
09:24:49
| RE: 1993 5.2 Driver's side motor mount
IP: Logged
Message:
Has anyone replaced this part?
|
Bucket
GenII
8/14/2007
10:33:45
|  RE: 1993 5.2 Driver's side motor mount
IP: Logged
Message:
Mines a 94 and i recall taking mine out once to look at it,i just unbolted it and jacked up the motor,it was pretty simple.
|
Over the Hill
Dodge Dakota
JOIN HERE
8/16/2007
20:42:41
| RE: 1993 5.2 Driver's side motor mount
IP: Logged
Message:
Did my '92 several years ago. If I remember, it wasn't necessarily difficult, just tight quarters. The one thing I do remember is the new mount did not line up easily. I had to take a long pry bar and 'finesse' the engine a little to line it up. The hardest part was replacing the bolts in the block - there was not a whole lot of room to work. I think I used a ratcheting box wrench for the bolts in the block.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
