| From | Message |
jim
Dodge Dakota
JOIN HERE
4/26/2007
16:43:20
|
 Subject: 33's with torsion lift?
IP: Logged
Message:
whats up guys... hey i have an '00 dakota quad cab with a 360 in it. Im currently rollin on 31/10.50/15's. Does anyone know if i would be able to fit 33's on if i crank the torsion bars up. thanks
|
GraphiteDak
GenIII
4/26/2007
22:32:31
|  RE: 33's with torsion lift?
IP: Logged
Message:
How have the 31 10.50's been?
Later in the summer I may get a new set of tires. I've got 255 65 16's which are same height as stock. Now I've got the gears to go a lot bigger.
I've heard that 32's were the limit with a torsion crank. I think some ppl said they could trim away some of the fender plastic to get 33's.
Look in the offroad section too.
|
Jetsfan8099
Dodge Dakota
JOIN HERE
4/27/2007
06:57:06
| RE: 33's with torsion lift?
IP: Logged
Message:
Probably a slight difference in capability between a 33 x 11.5 or a 305/70 (33x 12.5)...either way, I would recommend getting the BL. I have a 3" BL and cranked my T-bars an inch and I still rub slightly with my 305/70 R16's.
2004 QC
|
Dennis
Dodge Dakota
JOIN HERE
4/27/2007
14:35:56
| RE: 33's with torsion lift?
IP: Logged
Message:
I have an 00 club cab and have been running with 32 X 11.5 mud terrain tires for almost 45000 miles. They actually measure 33" across. I didn't lift anything. The only thing on the suspension that isn't stock are the rancho shocks. they rubbed a little on tight turns when I first got them, but I have no issues (other than the noise from the tread). I will be going back to all terrain tires soon but they will be 32s as well.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
