| From | Message |
Lee
Dodge Dakota
JOIN HERE
4/18/2007
18:23:38
|
 Subject: 318"s
IP: Logged
Message:
I have a 92 Dakota with the 318 magnum and was wondering what is required to put in a 96 318 into it. Please e mail me at lee49331@yahoo.com
Thanks
Lee
|
high flow
Dodge Dakota
JOIN HERE
4/18/2007
19:39:47
| RE: 318"s
IP: Logged
Message:
one thing i will tell you
when or if you do the swap
use the exhaust manifolds off the 92!
and as far as the engines only thing i can think of is the 92 is EGR 96 may not be
|
01Motorsport
Dodge Dakota
JOIN HERE
4/18/2007
19:58:40
| RE: 318"s
IP: Logged
Message:
1992 and 1996 engine computers are different. '92-'93 exhaust manifolds were 1/4" larger inside diameter.
|
gen1dak
Dodge Dakota
JOIN HERE
4/18/2007
22:06:09
| RE: 318"s
IP: Logged
Message:
Use all the bolt-ons (including intake and exhaust) from the '92. The '96 will not be quite as punchy since the cam timing was dialed back a little after '92. Course, you could always use the '92's cam, but if you're gonna do that, you might as well get an even better cam.
|
Super bee
GenI
4/19/2007
01:08:45
| RE: 318"s
IP: Logged
Message:
whats wrong with the 92 engine?
1990 sport RC SB, 1995 318drivetrain, 3.92 gears (came with truck) Powertrax "traction system", 95 dash/steering wheel, hearthrob exhaust, headers, cutout after y-pipe, necessary electric fan add-a-leafs, 30x9.5 mud tires, cranked T-bars, AR 39 15x8 rims, grill guard, roll bars
|
jayb
Dodge Dakota
JOIN HERE
4/19/2007
19:51:29
| RE: 318"s
IP: Logged
Message:
dude, the 96 isnt gonna be any better than the 92. the only differences between the engines is the 96 uses a OBD2 computer which comtrolls the transmission if its automatic. the 92 uses OBD1. the exhaust is different 2. its a retarded swap.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
