| From | Message |
midnightdak
Dodge Dakota
JOIN HERE
3/25/2007
11:22:14
|
 Subject: ? about 408 and stock gauges
IP: Logged
Message:
I just got the engine running and its bad. I have the stock gears and rearend and i can feel tires breaking lose at 30 or faster and i haven't even hit over 4 grand. Now back to my question...I want to try to get the odometer to work. I don't want any guages to work but this one. I have a 5 inch Cobalt tach and the sh!ty thing is that Cobalt doesn't make a oil or temp gauge in 2 5/8. I also have a TCI full manual auto 727 and to get the speedo to work don't i just go to Dodge?
|
dude
Dodge Dakota
JOIN HERE
3/25/2007
17:37:49
| RE: ? about 408 and stock gauges
IP: Logged
Message:
year, make, model etc,
& more infos about how the truck
was equipped originaly from the
factory would help a lot for some answers.
|
midnightdak
Dodge Dakota
JOIN HERE
3/25/2007
20:34:22
| RE: ? about 408 and stock gauges
IP: Logged
Message:
2001 4.7 dakota dakota cc It has all the power options
|
dude
Dodge Dakota
JOIN HERE
3/25/2007
21:59:37
| RE: ? about 408 and stock gauges
IP: Logged
Message:
Not too familiar with Dak's but,
does the original speedo get its signal
from a sensor on top of the rear axle?
(electronic signal thru the computer)
If so an older style speedo (mechanically
driven by a transmisson gear & cable)
will have to be installed in it's place.
|
dude
Dodge Dakota
JOIN HERE
3/25/2007
22:03:26
| RE: ? about 408 and stock gauges
IP: Logged
Message:
asuming the factory computer is not required
or doesn't function at all with your 408 / 727 setup.
|
midnightdak
Dodge Dakota
JOIN HERE
3/26/2007
14:28:43
| RE: ? about 408 and stock gauges
IP: Logged
Message:
I'm putting in and aftermarket speedo and it is electronic. I really want my odometer to work so i know how many miles are on my new engine.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
