| From | Message |
Red99DakR/T
Dodge Dakota
JOIN HERE
2/12/2007
14:42:26
|
 Subject: Keyless Entry
IP: Logged
Message:
I lately had my keyless entry stop working. Electric locks works fine, and yes I changed the batteries in my remote. I'm not sure where the receiver is located in the truck, and it is factory installed. I even went as far as disconnecting the battery for the truck to see if it is a glitch, but no luck. Can anyone tell me what else I can do to get it to start working again. One added note, it has given me problems other times, but only in severe cold, but that was a long time ago. Help....
|
daddio
Dodge Dakota
JOIN HERE
2/12/2007
15:09:40
|  RE: Keyless Entry
IP: Logged
Message:
you probably need to re-program the remote. the instructions are rpobably in the FSM. dealers do it for between 50 and 75 bucks or could buy instructions online for about $9.95.
good luck
|
Fasstdak
Dodge Dakota
JOIN HERE
2/12/2007
23:27:48
| RE: Keyless Entry
IP: Logged
Message:
It's intergrated into the CTM (Central Timer Module) - it's to the right of the glovebox under the dash. They are known for causing issues with condensation and/or humidity (fixed in the superceded CTM's).
DRB required to program the remotes.
|
Red99DakR/T
Dodge Dakota
JOIN HERE
2/14/2007
20:43:49
| RE: Keyless Entry
IP: Logged
Message:
Problem resolved. I decided Fu^* it and pulled the remote apart and cleaned the whole thing with alcohol. Works like new....
|
pacman
Dodge Dakota
JOIN HERE
2/18/2007
10:39:00
| RE: Keyless Entry
IP: Logged
Message:
Ya just gotta love the no-cost quick-fix don't ya? Good for you!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
