| From | Message |
Peter
Dodge Dakota
JOIN HERE
9/23/2006
20:28:11
|
 Subject: Holley EFI Throttle Body
IP: Logged
Message:
I was looking on summitracing.com and came across a 5.2/5.9 Holley 52mm tb. I was wondering if any one has tried using it on a 3.9 and if it may perform better than an f&b or fastman tb.
Here's the part# HLY-112-557
|
Mopar318
GenII
9/23/2006
23:44:50
| RE: Holley EFI Throttle Body
IP: Logged
Message:
Your not gonna want something that large on a 6 unless you are HEAVILY modified. I know a guy running low 13's with his nitroused/heads/cam 3.9 dak that was running a 50mm F&B.
Old setup: 1/4 mile on old setup: 13.965 @ 100.10 MPH, Crappy 2.236 60' on street tires
Mods: Paxton NOVI 2000 supercharger @ 10 #'s, M1 4Bbl, F&B 58mm TB, Gibson headers, JBA Y-pipe, and a Locker
|
2002 R/T
Dodge Dakota
JOIN HERE
9/24/2006
14:01:51
| RE: Holley EFI Throttle Body
IP: Logged
Message:
i run the holley 52mm with my nitoused, almost full bolt on R/T.
|
trucky
Dodge Dakota
JOIN HERE
9/25/2006
18:49:58
| RE: Holley EFI Throttle Body
IP: Logged
Message:
what about on a v8...is it a good idea to knock it up 2 or 4 mm?
|
PB
Dodge Dakota
JOIN HERE
9/29/2006
21:57:54
| RE: Holley EFI Throttle Body
IP: Logged
Message:
on the krc performance site it sais unless your
v-6 is seriously modded stay with the 48 it is stock size but it flows much much more. like 660 cfm vs.probably around 550 if you go to big you will kill your tourque.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
