| From | Message |
rammer
Dodge Dakota
JOIN HERE
10/10/2006
14:50:22
|
 Subject: RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
the headers are the shorties. if your stock manafolds fit, these will.not sure on the brand. i bought them through summit. i also have a set of mopars 1.7 rockers. they are not rollers. i used them for maybe 1000 miles if that. im running a bigger cam now so i cant use the higher lift rockers.
|
Ron
Dodge Dakota
JOIN HERE
10/10/2006
16:52:27
|  RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
For rammer:How much are you askin for the headers?I'm not to sure what rockers or rollers I have on there now but I'm tryin to soup it up, so-to-say, a little at a time.You know,make it a little meaner and faster.If I put a better cam in it,what would you recommend?Thanks again!!
|
clint282cc
Dodge Dakota
JOIN HERE
10/10/2006
23:31:52
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
hey ram rod. how much you wantin for those 1.7s? im definatly interested!!
|
DODGE GOD
Dodge Dakota
JOIN HERE
10/11/2006
11:02:16
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
At least MY stuff still runs. You guys got all kinds of good advice that you didn't follow and you blew it up. Who is the RETARD?
|
rammer
Dodge Dakota
JOIN HERE
10/11/2006
18:04:53
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
attn clint282cc
i think i would take $65 plus shipping. they ARE NOT rollers but a higher lift ratio.
|
clint282cc
Dodge Dakota
JOIN HERE
10/11/2006
18:45:09
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
right i know there not rollers. would i need not pushrods? or can i just bolt them on? email me
clint282cc@yahoo.com
|
GraphiteDak
GenIII
10/11/2006
22:02:57
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
Well I convinced Rammer to NOT sell the headers. We figured out a way to reverse one of them and be able to redo the piping from the headers to the turbo.
And who is this A$$ Clown who keeps talking sh*t?
Like no one else at the track with FAST cars hasn't tried something and blown something up here and there.
Rammer's truck is running again for now. We will continue to try things and tune it before he does a new engine.
One thing Rammer was doing was reading and taking advise from several sources. And you can ask 10 diff people at a REAL race track how they did something, and get 10 different ways!!!!
|
rammer
Dodge Dakota
JOIN HERE
10/12/2006
22:02:29
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
I SECOND THAT!
clint282cc they just bolt on. nothing else needed.gives extra lift and duration. ability to get more air/fuel in and exhaust out! i payed about $140 or so.
|
clint282cc
Dodge Dakota
JOIN HERE
10/12/2006
22:30:23
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
sounds good. email me on how you want payment and what not.
|
GraphiteDak
GenIII
10/13/2006
01:46:24
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
Rammer. I think when we install and mod them headers, you need to put the stock injectors back in. Then we'll use some of them extra 39# monsters to add extra fuel in the intake again. I think we can control it much better with a similar controller as running my ATV.
So chop chop with Jeremy's Rice Rocket Saturday and get to hacking your pipes! Got no time the next weekend, as we have to go to your bro's funeral!
|
mopar318
GenII
10/15/2006
11:32:57
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
Rammer if clint doesnt take those rockers I will take them.
Old setup: 1/4 mile on old setup: 13.965 @ 100.10 MPH, Crappy 2.236 60' on street tires
Mods: Paxton NOVI 2000 supercharger @ 10 #'s, M1 4Bbl, F&B 58mm TB, Gibson headers, JBA Y-pipe, and a Locker
|
clint282
Dodge Dakota
JOIN HERE
10/15/2006
12:46:11
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
hey i called them!! im just waitin for rammer to gimme an address to mail him some money.
rammer e-mail me asap. clint282cc@yahoo.com
|
rammer
Dodge Dakota
JOIN HERE
10/16/2006
12:51:33
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
attn clint282cc
i shot you an e-mail w/ my info. $65 plus shipping. it shouldnt be more than $10 depending on where you live.
and mopar318. if for some reason this deal falls through they will be yours
|
Ron
Dodge Dakota
JOIN HERE
10/16/2006
17:34:09
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
Hey rammer,What was you askin for those headers? Let me know.
|
rammer
Dodge Dakota
JOIN HERE
10/16/2006
20:21:11
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
i decided to not sell the headers.i think i figured a way to use them to get some better flow for my turbo.
if you want to buy some call summit racing. they are summit brand i think i payed about $175
or so. the # is 1-800-230-3030.
|
Ron
Dodge Dakota
JOIN HERE
10/16/2006
22:04:30
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
Alrighty,Thanks For The Info!
|
GraphiteDak
GenIII
10/30/2006
00:43:16
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
Well Rammer did it now.
His bottom end had suffered since way back when them head gasket materials worked their way down and plugged his oil pickup screen. We spun the bearings and he threw in new ones just to limp it around until later when he wants a 360 block.
This weekend we went to go ride our ATV's yesterday each of us in our trucks and his started knocking way worse (was already knocking a little but we knew why) and he lost oil pressure.
Neither one of us brought a tow strap and I had the feeling it would not make it home (22 miles back) but he tried to drive back with me following.
1 mile if that and I got to see a smoke cloud under his truck then a stream of oil all over the highway!
Here's a pic from my camera phone...
Yes. That's a entire rod cap haging OUTSIDE of the oil pan!
I know it had to have trashed that block!
Anyone who knows of a 360 engine that has a good block and oil pan he's interested as he is wanting to do a 408.
22 miles back and his truck don't feel like anything behind my Dakota compared to my 8,000 Lb Toy Hauler! Not even enough to take it out of O/D but again look at my gear ratio :)
Here's two cameraphone videos of us looking at it!
http://www.paysonarizona.net/Home%20Videos/Chris/102806_ChrisThrewRod_01.3g2
http://www.paysonarizona.net/Home%20Videos/Chris/102806_ChrisThrewRod_02.3g2
|
Mopar318
GenII
10/30/2006
20:59:38
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
Thats a funny sight..but at the same time sad. Lol. This just means you get to upgrade!
And its great timing too because I know a guy selling a freshly rebuilt 360
http://dakota-durango.com/forum/showthread.php?t=25486
Hes a great dude, I bought my slicks from him and talk to him all the time on AIM.
Old setup: 1/4 mile on old setup: 13.965 @ 100.10 MPH, Crappy 2.236 60' on street tires
Mods: Paxton NOVI 2000 supercharger @ 10 #'s, M1 4Bbl, F&B 58mm TB, Gibson headers, JBA Y-pipe, and a Locker
|
rammer
Dodge Dakota
JOIN HERE
10/31/2006
14:46:11
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
yah it does look bad.it sure made a loud bang when it came apart. so i will be looking for an 360 block w/ main caps so i can go to a 408 stroker motor. i havent decided on if im keeping turbo on truck or take it off and put on my 79 mustang. still have time until i get tax returns so i can fix my truck.
|
Ron
Dodge Dakota
JOIN HERE
10/31/2006
16:19:40
| RE: 318 at 9PSI of boost...then BOOM!!!
IP: Logged
Message:
Does anyone know if anybody makes a carbon fiber hood for my 92 Dakota?I've checked around but haven't found anything yet.Sorry about your mess rammer.I was ridin' in a little Sunfire doin about 70 when it threw a rod out the front of the engine.I know what ya mean when you said it sure made a loud bang,and oil all over the highway.Best of luck on gettin' it fix!
|
| | <<Previous Page P 5 Next Page>> |
