| From | Message |
ub
Dodge Dakota
JOIN HERE
8/04/2004
19:04:31
|
 Subject: uhg, ball joints
IP: Logged
Message:
i'm in the process of replacing my ball joints (all of them) and get the driver's side off and realize that the bolts in the aftermarket ball joints are smaller than the holes in the frame. Can anyone shed some light into this problem? Any tips, or has anybody run into this themselves?
|
Fred E
Dodge Dakota
JOIN HERE
8/05/2004
09:41:06
| RE: uhg, ball joints
IP: Logged
Message:
I just replaced my ball joints on my 1999 2wd & the bolts were the right size. Did you have the originals on or did you have other replace ments on there. I put on napa 260-1491 upers same as moogs and the bolts fit perfect
|
foxrun578
Dodge Dakota
JOIN HERE
8/06/2004
13:30:16
| RE: uhg, ball joints
IP: Logged
Message:
I had the same problem. I bought new bolts at the larger size and drilled out the new ball joints. Worked fine.
|
Big Red Buddy
Dodge Dakota
JOIN HERE
8/08/2004
19:05:31
| RE: uhg, ball joints
IP: Logged
Message:
I am replacing all ball joints on my 1999 4wd Dakota (40,000 miles) . . . is there a recall?
This should not be happening since useage has been very light . . . not ever heavy towing, etc.
|
cavindude
Dodge Dakota
JOIN HERE
8/09/2004
23:12:58
|  RE: uhg, ball joints
IP: Logged
Message:
Im replacing the ball joints at 52k miles at a cost of 500$. Whats up with the ball joint problem?
|
freak
Dodge Dakota
JOIN HERE
8/11/2004
19:24:11
| RE: uhg, ball joints
IP: Logged
Message:
Not a recall, genetic defect.
|
Littlefool
Dodge Dakota
JOIN HERE
6/14/2013
20:37:46
| RE: uhg, ball joints
IP: Logged
Message:
Made in china and put in your truck, will last until warranty is off.
We are all fools.....
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
