Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:22:23 - 12/19/2024

V6 Dakotas
FromMessage
cobrax
Dodge Dakota
JOIN HERE


8/04/2004
11:57:22

Subject: TB Question
IP: Logged

Message:
I have a 1998 dakota 4x4 with the 3.9l v6. I have seen a lot of talk on this forum about putting a new TB on it.

Can someone who has done this tell me how much of a horse power increase they recieved and if it is worth trying? Also, which one would I need to buy and where do I get it?

Thanks!



another mark
Dodge Dakota
JOIN HERE


8/04/2004
13:09:34

RE: TB Question
IP: Logged

Message:
there was a big difference when i put a 48mm F&B TB on my
99 3.9

http://www.fbthrottlebodies.com/



Just Looking
Dodge Dakota
JOIN HERE


8/04/2004
13:13:15

RE: TB Question
IP: Logged

Message:
anyones whos done it will tell u its worth it
And im one of those people :)

in a v8 i think it was around 10 more hp to the rear wheels

but thats beside the point with this mod ur increasing throttle response noticably

As for the best i think it was flowmetrics but since im cheap i grinded my own with a dremel




GB2000
GenIII
 User Profile


8/04/2004
18:15:44

RE: TB Question
IP: Logged

Message:
I did the same...got another stock V6 tb and ground it down with a dremel. Great mod...though I'd LOOOVE to go with an F&B sometime, just too broke right now.

Josh

http://www.cardomain.com/id/sentenced

TimG
Dodge Dakota
JOIN HERE
 Email

8/04/2004
19:37:26

RE: TB Question
IP: Logged

Message:
Put a stock V8 on mine, best mod I've done so far. Definatly worth it.
Dont waste your time & money on headers though.



GearGrinder
Dodge Dakota
JOIN HERE
 Email

8/04/2004
20:02:38

RE: TB Question
IP: Logged

Message:
From all that I've read, it is one of the top three mods to do. The easist thing to do is use a stock v8 TB which requires a v8 trottle cable. (uses all the same sensors). Another choice is to "port & polish" the v6 TB.(cheap & easy). The $$ choice is a Fastman or F&B tb. I think I also read that it's good for 10hp & better responce. I just finished porting & polishing a used v6 tb, and will soon find out how it works.



Jerry
Dodge Dakota
JOIN HERE


8/08/2004
10:32:29

RE: TB Question
IP: Logged

Message:
I was wondering i have a 3.9 v6 and ive read alot about tb's in them and which gives u the most power the F&B 48mm, the v8 tb, or just having urs ported n polished?



don
Dodge Dakota
JOIN HERE
 Email

8/09/2004
22:39:48

RE: TB Question
IP: Logged

Message:
where can i get a tb for my 3.9L v6 1991 dakota i really would like to get a tb around 150-200$ any help would be great



GB2000
GenIII
 User Profile


8/10/2004
01:48:25

RE: TB Question
IP: Logged

Message:
http://www.car-part.com

http://www.cardomain.com/id/sentenced

dwruger
Dodge Dakota
JOIN HERE
 Email

8/10/2004
17:57:17

RE: TB Question
IP: Logged

Message:
In tb guessing = throttle body. by putting on a stock v8 one and a new v8 throttle cable. my cruise and all the sensers are the same but do i need to have any sensers advanced or reset. mine is a 98, 3.9 thanx



dwruger
Dodge Dakota
JOIN HERE
 Email

8/10/2004
17:57:47

RE: TB Question
IP: Logged

Message:
In tb guessing = throttle body. by putting on a stock v8 one and a new v8 throttle cable. my cruise and all the sensers are the same but do i need to have any sensers advanced or reset. mine is a 98, 3.9 thanx



dwruger
Dodge Dakota
JOIN HERE
 Email

8/10/2004
18:12:15

RE: TB Question
IP: Logged

Message:
needed to add to last request, do i need to change injectors also,and i think i read once about changing the tranny cable? as in sensers meaning timing or any. and what yr of tb should i be looking for for a donor (mines a 98)thanx




GB2000
GenIII
 User Profile


8/10/2004
20:11:04

RE: TB Question
IP: Logged

Message:
When you change the tb, you'll just need to swap the throttle bodies, sensors (cuz you know yours work), and then on some Dakotas you'll need to switch your throttle cable with a new one (depending on what linkage your throttle body has). Then you just need to reset your computer.

To reset the computer...disconnect neg. battery terminal, turn key and hold in start position for approx. 30 seconds, reconnect terminal...then start it up, let it idle without touching the gas, shut it off, start it, let it idle again not touching the gas, shut it off, then start and drive or whatever.

Josh

http://www.cardomain.com/id/sentenced

dwruger
Dodge Dakota
JOIN HERE
 Email

8/11/2004
17:14:56

RE: TB Question
IP: Logged

Message:
thanx for info still need to know what yrs to look for for donor mines a 98 thanx




GB2000
GenIII
 User Profile


8/11/2004
17:18:52

RE: TB Question
IP: Logged

Message:
96+... get one from a 5.2L or 5.9L (both are the same size)...3.7 and 4.7 ones won't work.

Josh



http://www.cardomain.com/id/sentenced

dwruger
Dodge Dakota
JOIN HERE
 Email

8/11/2004
17:54:09

RE: TB Question
IP: Logged

Message:
thanx for info



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.