| From | Message |
mike e
Dodge Dakota
JOIN HERE
7/22/2004
21:36:37
|
 Subject: centerforce clutch
IP: Logged
Message:
Will a dual friction clutch for a 318 dakota with a NV3500 tranny fit a 2000 dakota with a 3.9L and a NV3500 tranny? Please help.
|
Seth
Dodge Dakota
JOIN HERE
7/22/2004
22:25:14
| RE: centerforce clutch
IP: Logged
Message:
I dont think so, the flywheels are differnt sizes as well as the clutch disc. I would go online to like autozone.com or somthing and see if they give you the same part number for the clutch assembly for a 318 and 3.9
|
Mike E
Dodge Dakota
JOIN HERE
7/23/2004
00:17:31
| RE: centerforce clutch
IP: Logged
Message:
thanks good Idea
|
Mike E
Dodge Dakota
JOIN HERE
7/23/2004
00:17:47
| RE: centerforce clutch
IP: Logged
Message:
thanks good Idea
|
rtdkota
R/T
7/23/2004
10:54:03
| RE: centerforce clutch
IP: Logged
Message:
Are you sure your 3.9L has a NV3500?? and not an AX-15??
http://www.socaldakota.com/performance_mopar_dakotadurangoram_clutches.html
Sam
www.socaldakota.com
|
dodgeboy
Dodge Dakota
JOIN HERE
7/23/2004
13:55:46
| RE: centerforce clutch
IP: Logged
Message:
Sam
Dodge switched over to the nv3500 behind the v6's in 2000. The input spline count on the ax and the nv are the same so they can be swapped onto either motor without changing the clutch disc.
To answer the original question, no the clutch will not work. The 318 and v6 use different size clutch. The boltpatter on the v6 flywheel is smaller than on the v8
|
mike e
Dodge Dakota
JOIN HERE
7/24/2004
18:04:41
| RE: centerforce clutch
IP: Logged
Message:
Well that sucks. Is there any performance clutch I can get for my truck? or should I just get another stocker for it?
|
dodgeboy
Dodge Dakota
JOIN HERE
7/24/2004
20:40:04
| RE: centerforce clutch
IP: Logged
Message:
Did you not click on the link Sam just posted? He sells centerforce clutchs for the v6.
Best prices out there too boot
|
rtdkota
R/T
7/26/2004
10:10:54
| RE: centerforce clutch
IP: Logged
Message:
Thanks for the heads up on the NV3500-AX15 info.
Regardless, I can get the correct clutch/pressure plate for any of the applications (AX or 1500) if Centerforce makes it.
Sam
619-274-1292
www.socaldakota.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
