| From | Message |
tek
Dodge Dakota
JOIN HERE
7/20/2004
19:12:05
|
 Subject: 4.10 gears
IP: Logged
Message:
anyone know where I can get a cheap 4.10 setup for my 96 dakota?
|
Sicminds 0088
Dodge Dakota
JOIN HERE
7/20/2004
19:45:31
| RE: 4.10 gears
IP: Logged
Message:
im looking for the same thing for my 98 3.9L. lookin to get off the line a little quicker.
|
Jon
Dodge Dakota
JOIN HERE
7/20/2004
21:07:20
| RE: 4.10 gears
IP: Logged
Message:
Do a search for a company called Randy's ring and pinion. They have always had every rear end part i needed. Your probably looking at about $250 for the gears, installation kit, and rebuild kit (which you should get if you have more than about 40k miles).
-Jon
|
tek
Dodge Dakota
JOIN HERE
7/21/2004
21:11:27
| RE: 4.10 gears
IP: Logged
Message:
Am I mistaken when I say that the 4.10 gears is the ring and pinion for the back axle? If so, what size back end does the 96 Dakota V6 3.9 L have?
|
IntenseDak39
*GenIII*
7/22/2004
09:07:05
| RE: 4.10 gears
IP: Logged
Message:
you would have a 8.25 10 bolt rear.
6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs
|
look
Dodge Dakota
JOIN HERE
7/22/2004
09:15:03
| RE: 4.10 gears
IP: Logged
Message:
look in the glove box your gear gears should b stamped inthere
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
