| From | Message |
mysteriusblur
Dodge Dakota
JOIN HERE
7/20/2004
18:57:23
|
 Subject: will it fit?
IP: Logged
Message:
I am going to buy a k&n FIPK for my 3.9 dakota. It is the made for the 5.9, though. I have heard that it fits right into the 3.9, but I have also heard that the A/C and cruise get in the way. Has anyone installed a k&n on a dak with A/C and cruise? If so, how easily does it fit?
|
another mark
Dodge Dakota
JOIN HERE
7/20/2004
19:41:05
|  RE: will it fit?
IP: Logged
Message:
depending what year we are talking about here, k&n 5.9 kits fit the 3.9s, there is even a kit just for those with cruise control, and it relocates a component for the air intake to go in place, i'd talk to k&n about it
|
mysteriusblur
Dodge Dakota
JOIN HERE
7/20/2004
22:27:22
| RE: will it fit?
IP: Logged
Message:
It's a 2000 if that is any help.
|
Gearsgrinder
Dodge Dakota
JOIN HERE
7/21/2004
09:41:14
| RE: will it fit?
IP: Logged
Message:
Here's my two cents.
I heard that you just have to shorten it up a bit when you get it. I don't know I bought a cheap no-name "short ram horn style" works great I box it in w/ sheet metal Myself, all for less then a hundred bucks.
|
ozric
Dodge Dakota
JOIN HERE
7/21/2004
13:43:56
| RE: will it fit?
IP: Logged
Message:
the Kit fits just fine... No need to cut anything. the Number of the kit you need depends on where you crusie control is. If its on the fire wall use the old kit, if its on the fender you need the newer kit.
I did a post about how I got mine to work on a 3.9l.
|
Marks LiL Bud
Dodge Dakota
JOIN HERE
7/27/2004
21:53:27
| RE: will it fit?
IP: Logged
Message:
Not a bad post. But I suspect you don't know what "mystery component" that plugs into the port is???
|
Val
Dodge Dakota
JOIN HERE
7/29/2004
02:12:48
| RE: will it fit?
IP: Logged
Message:
K&N is way overpriced, Check this out.
www.intenseperformance.com
I have the Stage II w/9" powerstack filter, a lot cheaper and looks a hellava lot better. The steel tubing won't crack either.
|
jared
Dodge Dakota
JOIN HERE
7/29/2004
20:11:52
| RE: will it fit?
IP: Logged
Message:
I have an airaid intake on mine and am very happy with it. There is no modification needed on the airaid. Takes about ten minutes to install.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
