Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:18:52 - 12/19/2024

V6 Dakotas
FromMessage
Twin10
Dodge Dakota
JOIN HERE


7/13/2004
10:05:12

Subject: Ball Joints
IP: Logged

Message:
Does anyone out there know if replacing OEM ball joints on the '99 2wd Daks with Moog greaseable ball joints is the right thing to do? I have read that they are much better than the OEM joints but it is always nice to get reassurance. I know I don't want to replace piece of sh$t ball joints over and over.



?
Dodge Dakota
JOIN HERE


7/13/2004
10:27:55

RE: Ball Joints
IP: Logged

Message:
Info is right , greaseable joints will last
much longer - provided you grease them
regularly..
This "greased for life B.S. " is exactly
that = B.S.



Black Dog
Dodge Dakota
JOIN HERE
 Email

7/13/2004
10:34:35

RE: Ball Joints
IP: Logged

Message:
Is it the right thing? To replace a dried up ball joint with play? Should you change your oil and use a Purolator (or whatever)filter? YES. Big job though. Time it with your next alignment and also inspect and replace as neccessary: Control arm Bushings, upper ball joint (if you are talking about the lower ball joint), tie rod ends, Pitman and Idler if equipped, pack bearings, replace hub assembly if equipped, and rebuild brakes as needed. Grease all your fittings every other oil change. Party on and Good Luck!



Relf
Dodge Dakota
JOIN HERE
 Email

7/14/2004
00:56:59

RE: Ball Joints
IP: Logged

Message:
Twin10, hell yes, it is the ONLY thing to do! Don't buy OEM from the dealer unless you want to re-replace them next week end! Good luck. Relf.



another mark
Dodge Dakota
JOIN HERE


7/14/2004
01:27:02

RE: Ball Joints
IP: Logged

Message:
Get them at rockauto.com. You can replace them yourself if you have a grinder or something else to break the old rivets off the stock ball joints. Then just get an alignment.



Twin10
Dodge Dakota
JOIN HERE


7/14/2004
13:19:22

RE: Ball Joints
IP: Logged

Message:
Thanks everyone. I ordered the Moogs from Rockauto yesterday. Thanks for the info.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.