Forums
Forum Tools
|
 |
00:02:56 - 12/20/2024
V6 Dakotas
| From | Message |
Twin10
Dodge Dakota
JOIN HERE
7/13/2004
08:44:13
|
 Subject: RE: Ball joints!
IP: Logged
Message:
'99 Dak 2WD. 67,000mi. Got new tires and was told all of my ball joints are junk. Are there any surprises or tips I need to know before I attempt this job?
|
BlackDog
Dodge Dakota
JOIN HERE
7/13/2004
11:00:12
| RE: RE: Ball joints!
IP: Logged
Message:
As suspension parts fail, others take on more stress. Look for wear on control arm bushings, tie rod ends and steering linkage parts. Look at hub, bearings, shocks, and brakes. NAPA ball joints are MOOG and greasable. Surprise! Don't try to tell yourself its not too big of a job because it is alot of work. If you remove the upper control arm or tie rods, plan on an alignment unless you got Jesus Christ squeazing impact wrenches.
|
BlackDog
Dodge Dakota
JOIN HERE
7/13/2004
11:31:27
| RE: RE: Ball joints!
IP: Logged
Message:
As suspension parts fail, others take on more stress. Look for wear on control arm bushings, tie rod ends and steering linkage parts. Look at hub, bearings, shocks, and brakes. NAPA ball joints are MOOG and greasable. Surprise! Don't try to tell yourself its not too big of a job because it is alot of work. If you remove the upper control arm or tie rods, plan on an alignment unless you got Jesus Christ squeazing impact wrenches.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
