| From | Message |
slow97dakota
Dodge Dakota
JOIN HERE
7/10/2004
21:31:00
|
 Subject: which headers
IP: Logged
Message:
welp its time to break down and buy some headers. my manifolds cracked. which is the better header, gibson or jba?
|
rtdkota
R/T
 
7/11/2004
00:01:35
| RE: which headers
IP: Logged
Message:
http://www.socaldakota.com/performance_mopar_dakotadurangoram_engine_headers.html
I sell the JBAs for the 3.9L--- the best available.
Sam
619-274-1292
www.socaldakota.com
|
Sicminds0088
Dodge Dakota
JOIN HERE
7/11/2004
17:30:24
| RE: which headers
IP: Logged
Message:
how much would the headers help my '98 3.9L?
I've already got K&N Intake, IAT Adjuster, MSD Ignition, MSD 8.5mm ignition wires, and a brass distributor cap and rotor.
|
Sicminds0088
Dodge Dakota
JOIN HERE
7/11/2004
17:32:51
| RE: which headers
IP: Logged
Message:
and a V8 throttle body
|
slow97dakota
Dodge Dakota
JOIN HERE
7/11/2004
23:29:16
| RE: which headers
IP: Logged
Message:
ithink i may go with the gibson. sic u have about the same mods as me but i have afew more. we should net some good gains. esp me when i spray
|
dingo
Dodge Dakota
JOIN HERE
7/12/2004
08:54:25
| RE: which headers
IP: Logged
Message:
G'day Sam, great looking web site!!! What makes the JBA Headers better than the Gibsons for the 3.9L V6 and do they come in SS finish.
|
i
Dodge Dakota
JOIN HERE
7/12/2004
15:33:29
| RE: which headers
IP: Logged
Message:
i dont see the need to spend the extra 40$ on jba's when they make the same exact header with no diffrences
|
rtdkota
R/T
7/12/2004
18:54:16
| RE: which headers
IP: Logged
Message:
The JBAs are 409 stainless... better material... But I can get and sell ya the Gibsons, email and let me know if you want a quote.
I pretty much try to sell what people want, and have gotten good feedback-- I am not a V6 owner, so I don't have first hand info on the Gibsons.
Let me know,
Sam
619-274-1292
www.socaldakota.com
|
another mark
Dodge Dakota
JOIN HERE
7/13/2004
01:37:30
| RE: which headers
IP: Logged
Message:
After 4 years both of my JBA manifolds developed some rather large cracks. They have an ok warranty, basically 50% off for a replacement set, I won't buy JBA again if this happens again. I'm amazed your stock manifolds cracked, those are pretty heavy duty. Mine were not the stainless type I should point out. Unless you have other mods I don't see the headers benefitting you much, need to free up your exhaust with a better flowing muffler and get a better TB and better airbox.
|
slow97dakota
Dodge Dakota
JOIN HERE
7/13/2004
14:44:07
| RE: which headers
IP: Logged
Message:
mark, i think my truck would benifit very well from the headers. esp when sprayin
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
