From | Message |
Chris Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
7/04/2004 14:04:35
|
Subject: timing IP: Logged
Message: Dose any one know what i should set my timing to?
It is a 02 dakota with a 3.9 with a s/c and i have a ignition with timing retard.
|
whitedakota2 Dodge Dakota JOIN HERE
7/04/2004 21:06:52
| RE: timing IP: Logged
Message: A good rule of thumb is to retard timing 1 degree for every 2 pounds of boost increase.
As far as standard base timing, you can't change that.
|
Chris Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
7/05/2004 13:49:53
| RE: timing IP: Logged
Message: I can retard the timing from in side the truck up to 20* but i was told that i can do my base timing but i need to do some work on the C/S but will i blow my truck up if i do this?
|
? Dodge Dakota JOIN HERE
7/06/2004 09:06:14
| RE: timing IP: Logged
Message: Spark timing is base set by Crank Position Sensor
in bell housing at back of motor.
NOT normally adjustable ..
But see www.krcperformance.com
for info to " touch it up a little "
Distributor controls fuel injector timing..
|
Chris Rogers Dodge Dakota JOIN HERE ![Email](http://www.dodgedakota.net/amb/icons/email.gif)
7/06/2004 19:16:55
| RE: timing IP: Logged
Message: I have a problem motor knocking. It's coming from the crankshaft. What's going on? Is it the sensor or what?
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|