From | Message |
brentsdak Dodge Dakota JOIN HERE
7/03/2004 17:58:23
|
Subject: AP3923 - What Gap should I set IP: Logged
Message: I have a '96 Dakota with the following Mods.
F&B Throttle Body and a FIPK
180 TSAT, Brass Cap/Rotor
I just bought the AP3923 what gap should I use?
|
GB2000 GenIII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1546
/thumbnail.gif)
7/03/2004 19:17:42
| RE: AP3923 - What Gap should I set IP: Logged
Message: I'm thinking .040...but don't quote me on that.
Josh
|
J and J Auto GenII
![User Profile](http://www.dodgedakota.net/amb/icons/profile.gif)
![](http://www.dodgedakota.net/members/profiles/1485
/thumbnail.gif)
7/04/2004 10:04:13
| RE: AP3923 - What Gap should I set IP: Logged
Message: .005 over factory specs
either .040 or .045
start at .045 and run a hundred miles or so and
see if you get a tan color, if not closing the
gap to .040 will raise the heat on the plugs
Larry J&J Auto
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|