| From | Message |
Terri
Dodge Dakota
JOIN HERE
7/03/2004
10:23:31
|
 Subject: obdii code
IP: Logged
Message:
Have a P0300 code- random/mutiple cylinder misfire. What would cause this? Have already changed plugs.
|
LilRed01
Dodge Dakota
JOIN HERE
7/03/2004
11:09:15
| RE: obdii code
IP: Logged
Message:
Did you change plugs because of this code? if so you may want to also change wires first, and cap and rotor as well. Bad/poor wires are the number one cause for this.
|
james black
Dodge Dakota
JOIN HERE
10/03/2005
19:09:15
| RE: obdii code
IP: Logged
Message:
my check engine light came on and the code is P0300 and i was wondering why this is happening this the second time this has happen
|
outdoorsman
Dodge Dakota
JOIN HERE
10/03/2005
23:10:08
| RE: obdii code
IP: Logged
Message:
are the plug wires old? how about the cap and rotor? are the wires seperated with the wire holders that go on the valve cover bolts? some wires will arc off to each other if touching.
|
Dan M
Dodge Dakota
JOIN HERE
10/04/2005
05:21:12
| RE: obdii code
IP: Logged
Message:
A new cap and rotor can make a world of difference!
- Dan M
|
2002RT
Dodge Dakota
JOIN HERE
6/17/2007
21:51:50
| RE: obdii code
IP: Logged
Message:
i get the same code but it hesitates really bad upon warm up until i go over 2800rpm
|
PETE
Dodge Dakota
JOIN HERE
6/19/2007
20:41:04
|  RE: obdii code
IP: Logged
Message:
Hey Terri be sure that you didn't crack a spark plug when you put your new plugs in,at night take a spray bottle of a soapy solution or water is fine mist it on and look for any wires or your cap might be leaking or looking like a X-MAS tree or your plugs as well if you could see them also might have injector might not be spraying right might try a good injector cleaner or have them cleaned with a high pressure cleaning or each one cleaned or just replace if you got the $$$ could have other issues causing your multiple misfire you having try these basics them turn to the fuel if all your ignition parts are good shape. Spark plugs are easy to crack without known to its to late or sometimes after a few drives you could pull them out and look for what they call flashover which looks like the porcelain looks like it rusted hair line crack and could be the culpit or just someone might of gave you some bad plugs that might been dropped known they cracked them, check your pickup coil and your crank sensor wiring to be good NO bare wires or frayed and properly secured connection this also can cause grief... GOOD LUCK...
|
ftheabus
Dodge Dakota
JOIN HERE
6/20/2007
09:31:19
| RE: obdii code
IP: Logged
Message:
Original post is 3 years old. I would like to think the person has the problem resolved by now ;)
|
PETE
Dodge Dakota
JOIN HERE
6/20/2007
16:42:30
|  RE: obdii code
IP: Logged
Message:
Good eyes didn't see that WOW brain fart... lol
|
Paul
Dodge Dakota
JOIN HERE
1/04/2011
16:28:13
| P0300 P0303 P0304
IP: Logged
Message:
First I was told to replace 2 injectors on my Dodege Dakota 2000, I did replace injector # 4 and 6, then the truck started to chuck after a 5 minutes drive, the new code was P1391, the crank positioning sensor needed replaced, that has been done, now the codes are P0300, P0303, P0304.... any information about it?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
