| From | Message |
House
Dodge Dakota
JOIN HERE
6/23/2004
20:06:20
|
 Subject: Ignition set up...
IP: Logged
Message:
Ok, I know that I am going with the msd-6a and blaster ss coil. However what I was wondering, I have read that a tach adapter is needed but no one ever gave the part number. I'm looking in my summit book and they have 2. One is msd-8910 for points and oem ignition modules with white wire, and msd-8920 for magnetic trigger systems. I would think 8920??
Also they have wiring harness adapters. I would think msd-8873 Harness for late model dodge., and not the msd-8860 for hei/chrysler.
I plan on running autolite platnum plugs gapped at about .60", does that sound right.
Also, anyone know the chepest place to get some 1.7 roller rockers??
Thanks a lot
House
|
the
Dodge Dakota
JOIN HERE
6/23/2004
20:22:17
| RE: Ignition set up...
IP: Logged
Message:
tach adapter u need is the msd-8910, u dont need the harness its simple enough to do with out it. if ur not goin to put any nitrous in the motor then get the platniums if u are then dont get the platniums and gap the plugs at .35. the cheapest place to get the rr is john@southeastrt.com send him a email and u will be pleased with his price
|
Bob Lincoln
Dodge Dakota
JOIN HERE
6/24/2004
08:36:44
|  RE: Ignition set up...
IP: Logged
Message:
Actually, .060 and .035 sound more realistic than .60 and .35 inches.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
