| From | Message |
Jerry
Dodge Dakota
JOIN HERE
6/19/2004
21:05:07
|
 Subject: error code
IP: Logged
Message:
I just bought a used 2002 Dakota.
It has flashed an error code that I had read as P1757(M).The brief description is"Governor pressure greater than 3psi when requested to be 0 psi(4 spd auto trans only). The MIL light went out after about 7 miles, but the code is still in memory. Can any one provide me with a more detailed description of what this error code means?
|
J and J Auto
GenII
6/20/2004
15:01:18
| RE: error code
IP: Logged
Message:
The gov presure on the 42RE is controled by a
presure sensor and a solonoid
May just have been a fluke, small piece of dirt
or posible bad sensor or solonoid
If the truck was sitting a long time the converter
may have drained down and triped the code
If it does not reoccur don't worrie about it
Larry
J&J Auto
|
Jerry
Dodge Dakota
JOIN HERE
6/20/2004
19:16:09
| RE: error code
IP: Logged
Message:
thanks for the quick reply
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
