| From | Message |
Canuck
Dodge Dakota
JOIN HERE
6/02/2004
22:47:27
|
 Subject: Throttle body info wanted
IP: Logged
Message:
I was wandering what kinda of mods can be done with a throttle body. I own a 1989 3.9. Should I try to switch to fuel injection or what?? It starting to seem like theres not many mods for the throttle body. Is there anyone who can tell me something for a little encouragment?? Like maybe a few benefits of the TB. What would be the best Mod
|
?
Dodge Dakota
JOIN HERE
6/04/2004
11:03:57
| RE: Throttle body info wanted
IP: Logged
Message:
1 - do a search - that is what it is here for.
2 - switch to fuel injection VERY complicated and EXPENSIVE unless you can find a source of
used parts.
|
daddio
Dodge Dakota
JOIN HERE
6/04/2004
11:15:10
| RE: Throttle body info wanted
IP: Logged
Message:
Bruce @ www.fiveomotorsports has injectors for the TBI now. check 'em out. i think you can port out that TBI. going to MFI will be a little tougher, new comp, wiring, etc. a non-mag motor has different heads and manifolds than mag motors.
|
vern
Dodge Dakota
JOIN HERE
6/04/2004
20:08:28
| RE: Throttle body info wanted
IP: Logged
Message:
port your tbi,remove the torque step down need the throttle plates,smooth [remove this] this step so it has a nice flow to the plates,
[don,t remove any where the plates are closed]
this can be done by removing the throttle plates and shaft,just take your time,
get a used one [$25-35] and try do it so if you screw up not out alot
i have one done i,ll sell $100 exchanged,$125 w/o
no sensors tbs,map,injectors etc
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
