| From | Message |
hemivpr
Dodge Dakota
JOIN HERE
5/31/2004
00:28:52
|
 Subject: Viper wheels
IP: Logged
Message:
Hi all,
I'm debating on wheels for my 94 2wd 3.9 dak. I'd like to do
something different but don't have massive amounts of money.
Does anyone know (for certain) if 94 viper three spoke wheels
will fit? I know the bolt pattern is the same and if I used front
wheels all the way around they will be one inch bigger than RT
17x9's. I'm worried about the offset and steering clearence.
Otherwise the RT 17's will be the choice. Then again, if the
viper wheels work maybe the new 18x10 fronts will work
too....
|
JFH
GenII
5/31/2004
10:40:51
|  RE: Viper wheels
IP: Logged
Message:
Yes, they will fit but you will need to be carefull with Tire selection, because a 10" wide wheel will be tight in the front.
http://www.cardomain.com/memberpage/546400
|
Hemivpr
Dodge Dakota
JOIN HERE
5/31/2004
13:34:43
|  RE: Viper wheels
IP: Logged
Message:
JFH - Thanks for the input. Any recomendations on the tire
size? Will the 255/55 - 17's that fit the RT 17x9's work ok with
that extra inch of viper width?
|
stephen
Dodge Dakota
JOIN HERE
5/31/2004
15:14:34
| RE: Viper wheels
IP: Logged
Message:
No, you'll need more like a 275-295 to fit the 10 inch wide Viper wheel. I believe they come with 295s stock. Hope that helps.
|
IntenseDak39
*GenIII*
6/01/2004
06:38:47
| RE: Viper wheels
IP: Logged
Message:
275's stock on the older 3 spoke 17x10's.
6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
